RepRap Generation 3 FirmwareI am the firmware to control the Generation 3 Electronics System | ||||||||
| Line: 31 to 31 | ||||||||
|---|---|---|---|---|---|---|---|---|
Firmware | ||||||||
| Changed: | ||||||||
| < < |
Stable version: Download RepRap 3rd Generation Firmware v1.0 | |||||||
| > > |
Stable version: Download RepRap 3rd Generation Firmware v1.1 | |||||||
| Subversion Repository: trunk/reprap/firmware/Sanguino/Sanguino3G. We have written firmware that implements both the Master and Slave devices. These firmwares are fully operational, but there are many improvements left to be made. You can get the up-to-the-minute version of the firmware from the subversion repository if you like to be cutting edge. The subversion code is not guaranteed to work, and may contain bugs. Use it at your own risk. | ||||||||
| Line: 65 to 65 | ||||||||
Host Control Software | ||||||||
| Changed: | ||||||||
| < < |
Now that you have the firmware installed, you'll want to control it with something. Currently, the easiest way of doing this is by using ReplicatorG. So, the first thing you'll want to do is install ReplicatorG. You'll need at least version 0003. The software comes pre-configured to work with a few common RepRap machines and contains information you need to configure it to control your machine. | |||||||
| > > |
Now that you have the firmware installed, you'll want to control it with something. Currently, the easiest way of doing this is by using ReplicatorG. So, the first thing you'll want to do is install ReplicatorG. You'll need at least version 0004. The software comes pre-configured to work with a few common RepRap machines and contains information you need to configure it to control your machine. | |||||||