<<O>>  Difference Topic PonokoBOM (r1.10 - 30 Jan 2009 - RussNelson)

 This Bill of Materials is complete for the instructions that have been written. More parts WILL be needed as more instructions are added. I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. The software which creates this listing is described at PonokoBOMcode. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.

There are links to show changes at the bottom of the page. I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3 . Apparently the BOM changed recently as well. That would be here: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.9&rev2=1.8 .

Line: 54 to 55

 1 M8 studding 110mm 4 M8 washer 1 PTFE tape
Added:
>
>		 1 PTFE thread sealing tape

1 gear motor 2 hole socket strip 4 large M3 washer
Added:
>
>		 1 piece of hardened steel box-cutter blade

4 small, stout springs 1 thick, solid, insulated copper wire
Line: 316 to 319

 14 M8 washer ifthrust 2 M8 wide aka fender washer 1 PTFE tape
Added:
>
>		 1 PTFE thread sealing tape

1 gear motor 2 hole socket strip 4 large M3 washer
Added:
>
>		 1 piece of hardened steel box-cutter blade

4 small, stout springs 1 thick, solid, insulated copper wire
Changed:
<
<		 -- RussNelson - 19 Jan 2009
>
>

-- RussNelson - 30 Jan 2009


 <<O>>  Difference Topic PonokoBOM (r1.9 - 29 Jan 2009 - RussNelson)
Changed:
<
<		 This Bill of Materials is complete for the instructions that have been written. More parts WILL be needed as more instructions are added. I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.
>
>		 This Bill of Materials is complete for the instructions that have been written. More parts WILL be needed as more instructions are added. I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. The software which creates this listing is described at PonokoBOMcode. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.

There are links to show changes at the bottom of the page. I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3 . Apparently the BOM changed recently as well. That would be here: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.9&rev2=1.8 .

 <<O>>  Difference Topic PonokoBOM (r1.8 - 19 Jan 2009 - RussNelson)

 This Bill of Materials is complete for the instructions that have been written. More parts WILL be needed as more instructions are added. I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.
Changed:
<
<		 There are links to show changes at the bottom of the page. I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3
>
>		 There are links to show changes at the bottom of the page. I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3 . Apparently the BOM changed recently as well. That would be here: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.9&rev2=1.8 .

PonokoBedChainFitting 






Line: 10 to 10





 12 M3 25mm screw
 12 M3 nut
 24 M3 washer



 Changed: 


<
<		

  3 M8 25mm screw



>
>		

  3 M8 60mm screw






  6 M8 nut
  9 M8 washer




Line: 118 to 118






  2 1200mm 3.5mm (#6) ball chain
  1 1200mm of 3.5mm ball chain






 Changed: 


<
<		

  4 8mm diameter 500mm long bright steel rod



>
>		

  2 520mm bright steel rod ifNEMA23
  4 8mm diameter 500mm long bright steel rod ifNEMA17
  2 8mm diameter 500mm long bright steel rod ifNEMA23






  3 M3 25mm screw
  3 M3 nut
  6 M3 washer



Line: 258 to 260





  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
 56 4.5mm BBs ifthrust
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle



 Added:   



>
>		

  2 520mm bright steel rod ifNEMA23






  2 5mm i/d soft plastic tubing, approx 22mm long
  7 608Z skate bearing
  7 608Z skate bearing ifskate
  1 625ZZNSK bearing
  4 80mm long 8mm diameter steel



 Changed: 


<
<		

 16 8mm diameter 500mm long bright steel rod



>
>		

 12 8mm diameter 500mm long bright steel rod
  4 8mm diameter 500mm long bright steel rod ifNEMA17
  2 8mm diameter 500mm long bright steel rod ifNEMA23






  3 8mm i/d compression spring approximately 16mm long
 12 M3 12mm screw
 29 M3 16mm screw



Line: 294 to 299





  2 M6 dome nut
  2 M6 half- or press-nut
  2 M6 washer



 Deleted: 



<
<		

  3 M8 25mm screw






  4 M8 400mm studding
  1 M8 500mm studding
  8 M8 600mm studding



 Added:   



>
>		

  3 M8 60mm screw






  2 M8 650mm studding
  2 M8 70mm bolt ifbolt
  2 M8 70mm studding ifstudding



Line: 317 to 322





  4 small, stout springs
  1 thick, solid, insulated copper wire




 Changed: 


<
<		



-- RussNelson - 03 Jan 2009



>
>		

-- RussNelson - 19 Jan 2009











 <<O>>  Difference Topic
		PonokoBOM
		(r1.7 - 03 Jan 2009 - RussNelson)







This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



 Changed: 


<
<		

There are links to show changes at the bottom of the page.  I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.7&rev2=1.3



>
>		

There are links to show changes at the bottom of the page.  I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3









  PonokoBedChainFitting 







Line: 19 to 18








  PonokoCornerAssembly 







 Changed: 


<
<		

 24 4.5mm BBs



>
>		

 24 4.5mm BBs ifthrust
  3 608Z skate bearing ifskate






 24 M3 25mm screw
 24 M3 nut
 48 M3 washer



 Added:   



>
>		

  6 M8 washer ifthrust










Line: 98 to 99









 Added:   



>
>		


  PonokoOptoEndstops 


  6 M3 25mm screw
  6 M3 nut
  6 M3 washer
  2 M5 16mm screw
  2 M5 nut









  PonokoRepRap 






Line: 126 to 137





  4 M3 12mm screw
  4 M3 16mm screw
  4 M3 20mm screw



 Changed: 


<
<		

 16 M3 25mm screw NEMA17



>
>		

 16 M3 25mm screw ifNEMA17






  2 M3 40mm screw
 12 M3 nut



 Changed: 


<
<		

 16 M3 nut NEMA17



>
>		

 16 M3 nut ifNEMA17






 22 M3 washer



 Changed: 


<
<		

 32 M3 washer NEMA17
  4 M5 25mm screw NEMA23
  4 M5 nut NEMA23
  8 M5 washer NEMA23



>
>		

 32 M3 washer ifNEMA17
  4 M5 25mm screw ifNEMA23
  4 M5 nut ifNEMA23
  8 M5 washer ifNEMA23












  PonokoUpperCornerAssembly 







 Added:   



>
>		

 32 4.5mm BBs ifthrust
  4 608Z skate bearing ifskate






 32 M3 25mm screw
 32 M3 nut
 64 M3 washer



 Added:   



>
>		

  8 M8 washer ifthrust










Line: 190 to 204








  PonokoYInstallation 







 Added:   



>
>		

  4 80mm long 8mm diameter steel






  8 M5 8mm grub screw
  8 M5 nut




Line: 198 to 213






  PonokoZAxisTensioner 


  2 5mm i/d soft plastic tubing, approx 22mm long






 Changed: 


<
<		

  4 M3 12mm machine screw
  5 M3 25mm machine screw
 10 M3 nuts
 14 M3 washers
  2 M5 50mm machine screw



>
>		

  4 M3 12mm screw
  5 M3 25mm screw
 10 M3 nut
 14 M3 washer






  2 M5 nut



 Changed: 


<
<		

  4 M5 washers



>
>		

  2 M5 screw
  4 M5 washer










Line: 241 to 256





  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 2200mm of 4.5mm ball chain
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre



 Changed: 


<
<		

 24 4.5mm BBs



>
>		

 56 4.5mm BBs ifthrust






  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle
  2 5mm i/d soft plastic tubing, approx 22mm long
  7 608Z skate bearing



 Added:   



>
>		

  7 608Z skate bearing ifskate






  1 625ZZNSK bearing



 Added:   



>
>		

  4 80mm long 8mm diameter steel






 16 8mm diameter 500mm long bright steel rod
  3 8mm i/d compression spring approximately 16mm long



 Changed: 


<
<		

  4 M3 12mm machine screw
  8 M3 12mm screw



>
>		

 12 M3 12mm screw






 29 M3 16mm screw
 22 M3 20mm screw



 Changed: 


<
<		

  5 M3 25mm machine screw
109 M3 25mm screw
 16 M3 25mm screw NEMA17



>
>		

120 M3 25mm screw
 16 M3 25mm screw ifNEMA17






 13 M3 30mm screw
 20 M3 40mm screw
  3 M3 50mm screw



 Changed: 


<
<		

197 M3 nut
 16 M3 nut NEMA17
 10 M3 nuts
364 M3 washer
 32 M3 washer NEMA17
 14 M3 washers



>
>		

213 M3 nut
 16 M3 nut ifNEMA17
384 M3 washer
 32 M3 washer ifNEMA17
  2 M5 16mm screw






  6 M5 25mm screw



 Changed: 


<
<		

  4 M5 25mm screw NEMA23



>
>		

  4 M5 25mm screw ifNEMA23






 13 M5 30mm screw



 Deleted: 



<
<		

  2 M5 50mm machine screw






  4 M5 50mm screw
 19 M5 8mm grub screw
 10 M5 grub screw



 Changed: 


<
<		

 52 M5 nut
  4 M5 nut NEMA23



>
>		

 54 M5 nut
  4 M5 nut ifNEMA23






  3 M5 nyloc nut



 Changed: 


<
<		

 32 M5 washer
  8 M5 washer NEMA23
  4 M5 washers



>
>		

  2 M5 screw
 36 M5 washer
  8 M5 washer ifNEMA23






  1 M6 32mm o/d washer
  2 M6 dome nut
  2 M6 half- or press-nut



Line: 295 to 308





  2 M8 nyloc nut
  1 M8 studding 110mm
 79 M8 washer



 Added:   



>
>		

 14 M8 washer ifthrust






  2 M8 wide aka fender washer
  1 PTFE tape
  1 gear motor



Line: 304 to 318





  1 thick, solid, insulated copper wire




 Changed: 


<
<		

-- RussNelson - 02 Jan 2009



>
>		

-- RussNelson - 03 Jan 2009











 <<O>>  Difference Topic
		PonokoBOM
		(r1.6 - 02 Jan 2009 - RussNelson)







This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



 Changed: 


<
<		

Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.6&rev2=1.3



>
>		

There are links to show changes at the bottom of the page.  I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.7&rev2=1.3











  PonokoBedChainFitting 




Line: 105 to 105








  PonokoRepRapXAxisAssembly 







 Changed: 


<
<		

  3 1200mm of 3.5mm ball chain



>
>		

  2 1200mm 3.5mm (#6) ball chain
  1 1200mm of 3.5mm ball chain






  4 8mm diameter 500mm long bright steel rod
  3 M3 25mm screw
  3 M3 nut



Line: 235 to 236






  all 


  1 0.1uF capacitor






 Changed: 


<
<		

  3 1200mm of 3.5mm ball chain



>
>		

  2 1200mm 3.5mm (#6) ball chain
  1 1200mm of 3.5mm ball chain






  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 2200mm of 4.5mm ball chain
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre



Line: 302 to 304





  1 thick, solid, insulated copper wire




 Changed: 


<
<		

-- RussNelson - 31 Dec 2008



>
>		

-- RussNelson - 02 Jan 2009











 <<O>>  Difference Topic
		PonokoBOM
		(r1.5 - 01 Jan 2009 - RussNelson)







This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



 Changed: 


<
<		

Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.54&rev2=1.3



>
>		

Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.6&rev2=1.3









  PonokoBedChainFitting 







Line: 18 to 19








  PonokoCornerAssembly 







 Added:   



>
>		

 24 4.5mm BBs






 24 M3 25mm screw
 24 M3 nut
 48 M3 washer



Line: 194 to 196








  PonokoZAxisTensioner 







 Changed: 


<
<		

  4 M3 12mm screw
  5 M3 20mm screw
  9 M3 nut
 14 M3 washer
  2 M5 ?mm screw
  4 M5 washer
  2 nut



>
>		

  2 5mm i/d soft plastic tubing, approx 22mm long
  4 M3 12mm machine screw
  5 M3 25mm machine screw
 10 M3 nuts
 14 M3 washers
  2 M5 50mm machine screw
  2 M5 nut
  4 M5 washers










Line: 236 to 239





  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 2200mm of 4.5mm ball chain
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre



 Added:   



>
>		

 24 4.5mm BBs






  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle



 Added:   



>
>		

  2 5mm i/d soft plastic tubing, approx 22mm long






  7 608Z skate bearing
  1 625ZZNSK bearing
 16 8mm diameter 500mm long bright steel rod
  3 8mm i/d compression spring approximately 16mm long



 Changed: 


<
<		

 12 M3 12mm screw



>
>		

  4 M3 12mm machine screw
  8 M3 12mm screw






 29 M3 16mm screw



 Changed: 


<
<		

 27 M3 20mm screw



>
>		

 22 M3 20mm screw
  5 M3 25mm machine screw






109 M3 25mm screw
 16 M3 25mm screw NEMA17
 13 M3 30mm screw
 20 M3 40mm screw
  3 M3 50mm screw



 Changed: 


<
<		

206 M3 nut



>
>		

197 M3 nut






 16 M3 nut NEMA17



 Changed: 


<
<		

378 M3 washer



>
>		

 10 M3 nuts
364 M3 washer






 32 M3 washer NEMA17



 Added:   



>
>		

 14 M3 washers






  6 M5 25mm screw
  4 M5 25mm screw NEMA23
 13 M5 30mm screw



 Added:   



>
>		

  2 M5 50mm machine screw






  4 M5 50mm screw
 19 M5 8mm grub screw



 Deleted: 



<
<		

  2 M5 ?mm screw






 10 M5 grub screw



 Changed: 


<
<		

 50 M5 nut



>
>		

 52 M5 nut






  4 M5 nut NEMA23
  3 M5 nyloc nut



 Changed: 


<
<		

 36 M5 washer



>
>		

 32 M5 washer






  8 M5 washer NEMA23



 Added:   



>
>		

  4 M5 washers






  1 M6 32mm o/d washer
  2 M6 dome nut
  2 M6 half- or press-nut



Line: 288 to 298





  1 gear motor
  2 hole socket strip
  4 large M3 washer



 Deleted: 



<
<		

  2 nut






  4 small, stout springs
  1 thick, solid, insulated copper wire





 <<O>>  Difference Topic
		PonokoBOM
		(r1.4 - 31 Dec 2008 - RussNelson)




 Changed: 


<
<		

As far as I know, this Bill of Materials is complete.  I may have made mistakes, however. This page is automatically generated.  Do not edit it.  If you think you need to edit it, or have found a mistake, contact RussNelson.  This BoM? is best for locating parts needed for a particular assembly.  For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



>
>		

This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.


Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.54&rev2=1.3









  PonokoBedChainFitting 







Line: 29 to 31





  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle
  2 608Z skate bearing



 Added:   



>
>		

  1 625ZZNSK bearing






  5 M3 20mm screw
  2 M3 30mm screw
  4 M3 40mm screw



Line: 63 to 66





  6 M3 nut
  8 M3 washer
  8 M5 30mm screw



 Deleted: 



<
<		

  2 M5 Nyloc nut






  6 M5 nut



 Added:   



>
>		

  2 M5 nyloc nut






 16 M5 washer




Line: 189 to 192









 Added:   



>
>		


  PonokoZAxisTensioner 


  4 M3 12mm screw
  5 M3 20mm screw
  9 M3 nut
 14 M3 washer
  2 M5 ?mm screw
  4 M5 washer
  2 nut









  PonokoZFrameAssembly 


  8 8mm diameter 500mm long bright steel rod






Line: 223 to 238





  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle
  7 608Z skate bearing



 Added:   



>
>		

  1 625ZZNSK bearing






 16 8mm diameter 500mm long bright steel rod
  3 8mm i/d compression spring approximately 16mm long



 Changed: 


<
<		

  8 M3 12mm screw



>
>		

 12 M3 12mm screw






 29 M3 16mm screw



 Changed: 


<
<		

 22 M3 20mm screw



>
>		

 27 M3 20mm screw






109 M3 25mm screw
 16 M3 25mm screw NEMA17
 13 M3 30mm screw
 20 M3 40mm screw
  3 M3 50mm screw



 Changed: 


<
<		

197 M3 nut



>
>		

206 M3 nut






 16 M3 nut NEMA17



 Changed: 


<
<		

364 M3 washer



>
>		

378 M3 washer






 32 M3 washer NEMA17
  6 M5 25mm screw
  4 M5 25mm screw NEMA23
 13 M5 30mm screw
  4 M5 50mm screw
 19 M5 8mm grub screw



 Changed: 


<
<		

  2 M5 Nyloc nut



>
>		

  2 M5 ?mm screw






 10 M5 grub screw
 50 M5 nut
  4 M5 nut NEMA23



 Changed: 


<
<		

  1 M5 nyloc nut
 32 M5 washer



>
>		

  3 M5 nyloc nut
 36 M5 washer






  8 M5 washer NEMA23
  1 M6 32mm o/d washer
  2 M6 dome nut



Line: 272 to 288





  1 gear motor
  2 hole socket strip
  4 large M3 washer



 Added:   



>
>		

  2 nut






  4 small, stout springs
  1 thick, solid, insulated copper wire




 Changed: 


<
<		

-- RussNelson - 14 Dec 2008



>
>		

-- RussNelson - 31 Dec 2008











 <<O>>  Difference Topic
		PonokoBOM
		(r1.3 - 14 Dec 2008 - RussNelson)




 Changed: 


<
<		

A "so far" BOM.  If you purchase at least these parts, you will not go wrong.  This page is automatically generated.  Do not edit it.  If you think you need to edit it, contact me first.



>
>		

As far as I know, this Bill of Materials is complete.  I may have made mistakes, however. This page is automatically generated.  Do not edit it.  If you think you need to edit it, or have found a mistake, contact RussNelson.  This BoM? is best for locating parts needed for a particular assembly.  For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.









  PonokoBedChainFitting 







 Added:   



>
>		

  1 2200mm of 4.5mm ball chain






  3 8mm i/d compression spring approximately 16mm long
 12 M3 25mm screw
 12 M3 nut



Line: 28 to 28





  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle



 Changed: 


<
<		

  2 680Z "sk8er b0y" bearing



>
>		

  2 608Z skate bearing






  5 M3 20mm screw
  2 M3 30mm screw
  4 M3 40mm screw



Line: 71 to 71








  PonokoFrameBaseAssembly 







 Added:   



>
>		

  4 8mm diameter 500mm long bright steel rod






 12 M3 40mm screw
 12 M3 nut
 24 M3 washer



Line: 92 to 93









 Added:   



>
>		


  PonokoRepRap 










  PonokoRepRapXAxisAssembly 


  3 1200mm of 3.5mm ball chain






Line: 145 to 151








  PonokoXIdlerAssembly 







 Changed: 


<
<		

  1 608Z "Sk8er B0yz" bearing



>
>		

  1 608Z skate bearing






  4 M3 12mm screw
  4 M3 16mm screw
 12 M3 20mm screw



Line: 162 to 168








  PonokoYAxisAssembly 







 Changed: 


<
<		

  2 608Z skate bearing



>
>		

  4 608Z skate bearing






  8 M3 30mm screw
  8 M3 nut
 12 M3 washer
  1 M8 500mm studding



 Changed: 


<
<		

  6 M8 nut
  4 M8 washer



>
>		

  2 M8 70mm bolt ifbolt
  2 M8 70mm studding ifstudding
  8 M8 nut
  2 M8 nut ifstudding
  2 M8 nyloc nut
 12 M8 washer












  PonokoYInstallation 







 Added:   



>
>		

  8 M5 8mm grub screw
  8 M5 nut












  PonokoZFrameAssembly 







 Added:   



>
>		

  8 8mm diameter 500mm long bright steel rod
  8 M5 8mm grub screw
 10 M5 grub screw
 17 M5 nut
  1 M8 half-nut
 11 M8 nut
  2 M8 washer










Line: 200 to 219





  1 0.1uF capacitor
  3 1200mm of 3.5mm ball chain
  1 200-300mm of nichrome wire with a resistance of about 8 ohms



 Added:   



>
>		

  1 2200mm of 4.5mm ball chain






  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle



 Changed: 


<
<		

  1 608Z "Sk8er B0yz" bearing
  2 608Z skate bearing
  2 680Z "sk8er b0y" bearing
  4 8mm diameter 500mm long bright steel rod



>
>		

  7 608Z skate bearing
 16 8mm diameter 500mm long bright steel rod






  3 8mm i/d compression spring approximately 16mm long
  8 M3 12mm screw
 29 M3 16mm screw



Line: 223 to 241





  4 M5 25mm screw NEMA23
 13 M5 30mm screw
  4 M5 50mm screw



 Changed: 


<
<		

  3 M5 8mm grub screw



>
>		

 19 M5 8mm grub screw






  2 M5 Nyloc nut



 Changed: 


<
<		

 25 M5 nut



>
>		

 10 M5 grub screw
 50 M5 nut






  4 M5 nut NEMA23
  1 M5 nyloc nut
 32 M5 washer



Line: 239 to 258





  1 M8 500mm studding
  8 M8 600mm studding
  2 M8 650mm studding



 Added:   



>
>		

  2 M8 70mm bolt ifbolt
  2 M8 70mm studding ifstudding






  1 M8 80mm studding



 Changed: 


<
<		

  1 M8 half-nut
 78 M8 nut



>
>		

  2 M8 half-nut
 91 M8 nut
  2 M8 nut ifstudding
  2 M8 nyloc nut






  1 M8 studding 110mm



 Changed: 


<
<		

 69 M8 washer



>
>		

 79 M8 washer






  2 M8 wide aka fender washer
  1 PTFE tape
  1 gear motor




 <<O>>  Difference Topic
		PonokoBOM
		(r1.2 - 14 Dec 2008 - RussNelson)







A "so far" BOM.  If you purchase at least these parts, you will not go wrong.  This page is automatically generated.  Do not edit it.  If you think you need to edit it, contact me first.



 Added:   



>
>		




  PonokoBedChainFitting 


  3 8mm i/d compression spring approximately 16mm long
 12 M3 25mm screw
 12 M3 nut
 24 M3 washer
  3 M8 25mm screw
  6 M8 nut
  9 M8 washer







  PonokoCornerAssembly 


 24 M3 25mm screw
 24 M3 nut
 48 M3 washer







  PonokoExtruderAssembly 








  1 0.1uF capacitor
  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle






 Added:   



>
>		

  2 680Z "sk8er b0y" bearing
  5 M3 20mm screw
  2 M3 30mm screw
  4 M3 40mm screw
  3 M3 50mm screw
 11 M3 nut
 23 M3 washer
  2 M5 25mm screw
  5 M5 30mm screw
  4 M5 nut
  1 M5 nyloc nut
  4 M5 washer
  1 M6 32mm o/d washer
  2 M6 dome nut
  2 M6 half- or press-nut
  2 M6 washer
  4 M8 nut
  1 M8 studding 110mm
  4 M8 washer
  1 PTFE tape
  1 gear motor
  2 hole socket strip
  4 large M3 washer
  4 small, stout springs
  1 thick, solid, insulated copper wire






  PonokoExtruderSocketAssembly 


  4 M3 16mm screw
  2 M3 25mm screw
  6 M3 nut
  8 M3 washer
  8 M5 30mm screw
  2 M5 Nyloc nut
  6 M5 nut
 16 M5 washer







  PonokoFrameBaseAssembly 


 12 M3 40mm screw
 12 M3 nut
 24 M3 washer
  4 M8 400mm studding
 16 M8 nut
  8 M8 washer







  PonokoFrameBracing 


 20 M3 25mm screw
 20 M3 nut
 40 M3 washer
  8 M8 600mm studding
  2 M8 650mm studding
 40 M8 nut
 40 M8 washer







  PonokoRepRapXAxisAssembly 


  3 1200mm of 3.5mm ball chain
  4 8mm diameter 500mm long bright steel rod
  3 M3 25mm screw
  3 M3 nut
  6 M3 washer
  4 M5 50mm screw
  2 M5 8mm grub screw
 10 M5 nut
  8 M5 washer
  1 M8 half-nut
  1 M8 nut
  1 M8 washer







  PonokoRepRapXMotorAssembly 


  4 M3 12mm screw
  4 M3 16mm screw
  4 M3 20mm screw
 16 M3 25mm screw NEMA17
  2 M3 40mm screw
 12 M3 nut
 16 M3 nut NEMA17
 22 M3 washer
 32 M3 washer NEMA17
  4 M5 25mm screw NEMA23
  4 M5 nut NEMA23
  8 M5 washer NEMA23







  PonokoUpperCornerAssembly 


 32 M3 25mm screw
 32 M3 nut
 64 M3 washer







  PonokoXAxisAssembly 


 17 M3 16mm screw
  1 M3 20mm screw
 19 M3 nut
 22 M3 washer







  PonokoXIdlerAssembly 


  1 608Z "Sk8er B0yz" bearing
  4 M3 12mm screw
  4 M3 16mm screw
 12 M3 20mm screw
  8 M3 25mm screw
  2 M3 40mm screw
 24 M3 nut
 46 M3 washer
  1 M8 80mm studding
  5 M8 nut
  3 M8 washer
  2 M8 wide aka fender washer







  PonokoYAxisAssembly 


  2 608Z skate bearing
  8 M3 30mm screw
  8 M3 nut
 12 M3 washer
  1 M8 500mm studding
  6 M8 nut
  4 M8 washer







  PonokoYInstallation 








  PonokoZFrameAssembly 








  PonokoZMotorAssembly 


  8 M3 25mm screw
  3 M3 30mm screw
 14 M3 nut
 25 M3 washer
  4 M5 25mm screw
  1 M5 8mm grub screw
  5 M5 nut
  4 M5 washer







  all 


  1 0.1uF capacitor
  3 1200mm of 3.5mm ball chain
  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle









  1 608Z "Sk8er B0yz" bearing
  2 608Z skate bearing
  2 680Z "sk8er b0y" bearing



 Added:   



>
>		

  4 8mm diameter 500mm long bright steel rod






  3 8mm i/d compression spring approximately 16mm long



 Changed: 


<
<		

  4 M3 12mm screw
 25 M3 16mm screw
 18 M3 20mm screw
 86 M3 25mm screw



>
>		

  8 M3 12mm screw
 29 M3 16mm screw
 22 M3 20mm screw
109 M3 25mm screw
 16 M3 25mm screw NEMA17






 13 M3 30mm screw



 Changed: 


<
<		

  6 M3 40mm screw



>
>		

 20 M3 40mm screw






  3 M3 50mm screw



 Changed: 


<
<		

150 M3 nut
272 M3 washer
  9 M5 25mm screw



>
>		

197 M3 nut
 16 M3 nut NEMA17
364 M3 washer
 32 M3 washer NEMA17
  6 M5 25mm screw
  4 M5 25mm screw NEMA23






 13 M5 30mm screw



 Changed: 


<
<		

  1 M5 8mm grub screw



>
>		

  4 M5 50mm screw
  3 M5 8mm grub screw






  2 M5 Nyloc nut



 Changed: 


<
<		

 21 M5 nut



>
>		

 25 M5 nut
  4 M5 nut NEMA23






  1 M5 nyloc nut



 Changed: 


<
<		

 33 M5 washer



>
>		

 32 M5 washer
  8 M5 washer NEMA23






  1 M6 32mm o/d washer
  2 M6 dome nut
  2 M6 half- or press-nut
  2 M6 washer



 Added:   



>
>		

  3 M8 25mm screw
  4 M8 400mm studding






  1 M8 500mm studding



 Added:   



>
>		

  8 M8 600mm studding
  2 M8 650mm studding






  1 M8 80mm studding



 Changed: 


<
<		

 15 M8 nut



>
>		

  1 M8 half-nut
 78 M8 nut






  1 M8 studding 110mm



 Changed: 


<
<		

 11 M8 washer



>
>		

 69 M8 washer






  2 M8 wide aka fender washer
  1 PTFE tape
  1 gear motor



Line: 45 to 254









 Changed: 


<
<		

-- RussNelson - 13 Dec 2008



>
>		

-- RussNelson - 14 Dec 2008











 <<O>>  Difference Topic
		PonokoBOM
		(r1.1 - 13 Dec 2008 - RussNelson)




Line: 1 to 1


 Added:   



>
>		

A "so far" BOM.  If you purchase at least these parts, you will not go wrong.  This page is automatically generated.  Do not edit it.  If you think you need to edit it, contact me first.



  1 0.1uF capacitor
  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle
  1 608Z "Sk8er B0yz" bearing
  2 608Z skate bearing
  2 680Z "sk8er b0y" bearing
  3 8mm i/d compression spring approximately 16mm long
  4 M3 12mm screw
 25 M3 16mm screw
 18 M3 20mm screw
 86 M3 25mm screw
 13 M3 30mm screw
  6 M3 40mm screw
  3 M3 50mm screw
150 M3 nut
272 M3 washer
  9 M5 25mm screw
 13 M5 30mm screw
  1 M5 8mm grub screw
  2 M5 Nyloc nut
 21 M5 nut
  1 M5 nyloc nut
 33 M5 washer
  1 M6 32mm o/d washer
  2 M6 dome nut
  2 M6 half- or press-nut
  2 M6 washer
  1 M8 500mm studding
  1 M8 80mm studding
 15 M8 nut
  1 M8 studding 110mm
 11 M8 washer
  2 M8 wide aka fender washer
  1 PTFE tape
  1 gear motor
  2 hole socket strip
  4 large M3 washer
  4 small, stout springs
  1 thick, solid, insulated copper wire






-- RussNelson - 13 Dec 2008




View topic
 | Diffs  | r1.10 | > | r1.9 | > | r1.8
 | More

Revision r1.1 - 13 Dec 2008 - 02:09 - RussNelson

Revision r1.10 - 30 Jan 2009 - 23:28 - RussNelson