<<O>>  Difference Topic PonokoBOM (r1.8 - 19 Jan 2009 - RussNelson)

 This Bill of Materials is complete for the instructions that have been written. More parts WILL be needed as more instructions are added. I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.
Changed:
<
<		 There are links to show changes at the bottom of the page. I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3
>
>		 There are links to show changes at the bottom of the page. I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3 . Apparently the BOM changed recently as well. That would be here: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.9&rev2=1.8 .

PonokoBedChainFitting 






Line: 10 to 10





 12 M3 25mm screw
 12 M3 nut
 24 M3 washer



 Changed: 


<
<		

  3 M8 25mm screw



>
>		

  3 M8 60mm screw






  6 M8 nut
  9 M8 washer




Line: 118 to 118






  2 1200mm 3.5mm (#6) ball chain
  1 1200mm of 3.5mm ball chain






 Changed: 


<
<		

  4 8mm diameter 500mm long bright steel rod



>
>		

  2 520mm bright steel rod ifNEMA23
  4 8mm diameter 500mm long bright steel rod ifNEMA17
  2 8mm diameter 500mm long bright steel rod ifNEMA23






  3 M3 25mm screw
  3 M3 nut
  6 M3 washer



Line: 258 to 260





  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
 56 4.5mm BBs ifthrust
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle



 Added:   



>
>		

  2 520mm bright steel rod ifNEMA23






  2 5mm i/d soft plastic tubing, approx 22mm long
  7 608Z skate bearing
  7 608Z skate bearing ifskate
  1 625ZZNSK bearing
  4 80mm long 8mm diameter steel



 Changed: 


<
<		

 16 8mm diameter 500mm long bright steel rod



>
>		

 12 8mm diameter 500mm long bright steel rod
  4 8mm diameter 500mm long bright steel rod ifNEMA17
  2 8mm diameter 500mm long bright steel rod ifNEMA23






  3 8mm i/d compression spring approximately 16mm long
 12 M3 12mm screw
 29 M3 16mm screw



Line: 294 to 299





  2 M6 dome nut
  2 M6 half- or press-nut
  2 M6 washer



 Deleted: 



<
<		

  3 M8 25mm screw






  4 M8 400mm studding
  1 M8 500mm studding
  8 M8 600mm studding



 Added:   



>
>		

  3 M8 60mm screw






  2 M8 650mm studding
  2 M8 70mm bolt ifbolt
  2 M8 70mm studding ifstudding



Line: 317 to 322





  4 small, stout springs
  1 thick, solid, insulated copper wire




 Changed: 


<
<		



-- RussNelson - 03 Jan 2009



>
>		

-- RussNelson - 19 Jan 2009











 <<O>>  Difference Topic
		PonokoBOM
		(r1.7 - 03 Jan 2009 - RussNelson)







This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



 Changed: 


<
<		

There are links to show changes at the bottom of the page.  I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.7&rev2=1.3



>
>		

There are links to show changes at the bottom of the page.  I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.8&rev2=1.3









  PonokoBedChainFitting 







Line: 19 to 18








  PonokoCornerAssembly 







 Changed: 


<
<		

 24 4.5mm BBs



>
>		

 24 4.5mm BBs ifthrust
  3 608Z skate bearing ifskate






 24 M3 25mm screw
 24 M3 nut
 48 M3 washer



 Added:   



>
>		

  6 M8 washer ifthrust










Line: 98 to 99









 Added:   



>
>		


  PonokoOptoEndstops 


  6 M3 25mm screw
  6 M3 nut
  6 M3 washer
  2 M5 16mm screw
  2 M5 nut









  PonokoRepRap 






Line: 126 to 137





  4 M3 12mm screw
  4 M3 16mm screw
  4 M3 20mm screw



 Changed: 


<
<		

 16 M3 25mm screw NEMA17



>
>		

 16 M3 25mm screw ifNEMA17






  2 M3 40mm screw
 12 M3 nut



 Changed: 


<
<		

 16 M3 nut NEMA17



>
>		

 16 M3 nut ifNEMA17






 22 M3 washer



 Changed: 


<
<		

 32 M3 washer NEMA17
  4 M5 25mm screw NEMA23
  4 M5 nut NEMA23
  8 M5 washer NEMA23



>
>		

 32 M3 washer ifNEMA17
  4 M5 25mm screw ifNEMA23
  4 M5 nut ifNEMA23
  8 M5 washer ifNEMA23












  PonokoUpperCornerAssembly 







 Added:   



>
>		

 32 4.5mm BBs ifthrust
  4 608Z skate bearing ifskate






 32 M3 25mm screw
 32 M3 nut
 64 M3 washer



 Added:   



>
>		

  8 M8 washer ifthrust










Line: 190 to 204








  PonokoYInstallation 







 Added:   



>
>		

  4 80mm long 8mm diameter steel






  8 M5 8mm grub screw
  8 M5 nut




Line: 198 to 213






  PonokoZAxisTensioner 


  2 5mm i/d soft plastic tubing, approx 22mm long






 Changed: 


<
<		

  4 M3 12mm machine screw
  5 M3 25mm machine screw
 10 M3 nuts
 14 M3 washers
  2 M5 50mm machine screw



>
>		

  4 M3 12mm screw
  5 M3 25mm screw
 10 M3 nut
 14 M3 washer






  2 M5 nut



 Changed: 


<
<		

  4 M5 washers



>
>		

  2 M5 screw
  4 M5 washer










Line: 241 to 256





  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 2200mm of 4.5mm ball chain
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre



 Changed: 


<
<		

 24 4.5mm BBs



>
>		

 56 4.5mm BBs ifthrust






  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle
  2 5mm i/d soft plastic tubing, approx 22mm long
  7 608Z skate bearing



 Added:   



>
>		

  7 608Z skate bearing ifskate






  1 625ZZNSK bearing



 Added:   



>
>		

  4 80mm long 8mm diameter steel






 16 8mm diameter 500mm long bright steel rod
  3 8mm i/d compression spring approximately 16mm long



 Changed: 


<
<		

  4 M3 12mm machine screw
  8 M3 12mm screw



>
>		

 12 M3 12mm screw






 29 M3 16mm screw
 22 M3 20mm screw



 Changed: 


<
<		

  5 M3 25mm machine screw
109 M3 25mm screw
 16 M3 25mm screw NEMA17



>
>		

120 M3 25mm screw
 16 M3 25mm screw ifNEMA17






 13 M3 30mm screw
 20 M3 40mm screw
  3 M3 50mm screw



 Changed: 


<
<		

197 M3 nut
 16 M3 nut NEMA17
 10 M3 nuts
364 M3 washer
 32 M3 washer NEMA17
 14 M3 washers



>
>		

213 M3 nut
 16 M3 nut ifNEMA17
384 M3 washer
 32 M3 washer ifNEMA17
  2 M5 16mm screw






  6 M5 25mm screw



 Changed: 


<
<		

  4 M5 25mm screw NEMA23



>
>		

  4 M5 25mm screw ifNEMA23






 13 M5 30mm screw



 Deleted: 



<
<		

  2 M5 50mm machine screw






  4 M5 50mm screw
 19 M5 8mm grub screw
 10 M5 grub screw



 Changed: 


<
<		

 52 M5 nut
  4 M5 nut NEMA23



>
>		

 54 M5 nut
  4 M5 nut ifNEMA23






  3 M5 nyloc nut



 Changed: 


<
<		

 32 M5 washer
  8 M5 washer NEMA23
  4 M5 washers



>
>		

  2 M5 screw
 36 M5 washer
  8 M5 washer ifNEMA23






  1 M6 32mm o/d washer
  2 M6 dome nut
  2 M6 half- or press-nut



Line: 295 to 308





  2 M8 nyloc nut
  1 M8 studding 110mm
 79 M8 washer



 Added:   



>
>		

 14 M8 washer ifthrust






  2 M8 wide aka fender washer
  1 PTFE tape
  1 gear motor



Line: 304 to 318





  1 thick, solid, insulated copper wire




 Changed: 


<
<		

-- RussNelson - 02 Jan 2009



>
>		

-- RussNelson - 03 Jan 2009











 <<O>>  Difference Topic
		PonokoBOM
		(r1.6 - 02 Jan 2009 - RussNelson)







This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



 Changed: 


<
<		

Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.6&rev2=1.3



>
>		

There are links to show changes at the bottom of the page.  I've been changing the BOM in the last several days; here is a link to the BOM that existed before that: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.7&rev2=1.3











  PonokoBedChainFitting 




Line: 105 to 105








  PonokoRepRapXAxisAssembly 







 Changed: 


<
<		

  3 1200mm of 3.5mm ball chain



>
>		

  2 1200mm 3.5mm (#6) ball chain
  1 1200mm of 3.5mm ball chain






  4 8mm diameter 500mm long bright steel rod
  3 M3 25mm screw
  3 M3 nut



Line: 235 to 236






  all 


  1 0.1uF capacitor






 Changed: 


<
<		

  3 1200mm of 3.5mm ball chain



>
>		

  2 1200mm 3.5mm (#6) ball chain
  1 1200mm of 3.5mm ball chain






  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 2200mm of 4.5mm ball chain
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre



Line: 302 to 304





  1 thick, solid, insulated copper wire




 Changed: 


<
<		

-- RussNelson - 31 Dec 2008



>
>		

-- RussNelson - 02 Jan 2009











 <<O>>  Difference Topic
		PonokoBOM
		(r1.5 - 01 Jan 2009 - RussNelson)







This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



 Changed: 


<
<		

Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.54&rev2=1.3



>
>		

Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.6&rev2=1.3









  PonokoBedChainFitting 







Line: 18 to 19








  PonokoCornerAssembly 







 Added:   



>
>		

 24 4.5mm BBs






 24 M3 25mm screw
 24 M3 nut
 48 M3 washer



Line: 194 to 196








  PonokoZAxisTensioner 







 Changed: 


<
<		

  4 M3 12mm screw
  5 M3 20mm screw
  9 M3 nut
 14 M3 washer
  2 M5 ?mm screw
  4 M5 washer
  2 nut



>
>		

  2 5mm i/d soft plastic tubing, approx 22mm long
  4 M3 12mm machine screw
  5 M3 25mm machine screw
 10 M3 nuts
 14 M3 washers
  2 M5 50mm machine screw
  2 M5 nut
  4 M5 washers










Line: 236 to 239





  1 200-300mm of nichrome wire with a resistance of about 8 ohms
  1 2200mm of 4.5mm ball chain
  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre



 Added:   



>
>		

 24 4.5mm BBs






  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle



 Added:   



>
>		

  2 5mm i/d soft plastic tubing, approx 22mm long






  7 608Z skate bearing
  1 625ZZNSK bearing
 16 8mm diameter 500mm long bright steel rod
  3 8mm i/d compression spring approximately 16mm long



 Changed: 


<
<		

 12 M3 12mm screw



>
>		

  4 M3 12mm machine screw
  8 M3 12mm screw






 29 M3 16mm screw



 Changed: 


<
<		

 27 M3 20mm screw



>
>		

 22 M3 20mm screw
  5 M3 25mm machine screw






109 M3 25mm screw
 16 M3 25mm screw NEMA17
 13 M3 30mm screw
 20 M3 40mm screw
  3 M3 50mm screw



 Changed: 


<
<		

206 M3 nut



>
>		

197 M3 nut






 16 M3 nut NEMA17



 Changed: 


<
<		

378 M3 washer



>
>		

 10 M3 nuts
364 M3 washer






 32 M3 washer NEMA17



 Added:   



>
>		

 14 M3 washers






  6 M5 25mm screw
  4 M5 25mm screw NEMA23
 13 M5 30mm screw



 Added:   



>
>		

  2 M5 50mm machine screw






  4 M5 50mm screw
 19 M5 8mm grub screw



 Deleted: 



<
<		

  2 M5 ?mm screw






 10 M5 grub screw



 Changed: 


<
<		

 50 M5 nut



>
>		

 52 M5 nut






  4 M5 nut NEMA23
  3 M5 nyloc nut



 Changed: 


<
<		

 36 M5 washer



>
>		

 32 M5 washer






  8 M5 washer NEMA23



 Added:   



>
>		

  4 M5 washers






  1 M6 32mm o/d washer
  2 M6 dome nut
  2 M6 half- or press-nut



Line: 288 to 298





  1 gear motor
  2 hole socket strip
  4 large M3 washer



 Deleted: 



<
<		

  2 nut






  4 small, stout springs
  1 thick, solid, insulated copper wire





 <<O>>  Difference Topic
		PonokoBOM
		(r1.4 - 31 Dec 2008 - RussNelson)




 Changed: 


<
<		

As far as I know, this Bill of Materials is complete.  I may have made mistakes, however. This page is automatically generated.  Do not edit it.  If you think you need to edit it, or have found a mistake, contact RussNelson.  This BoM? is best for locating parts needed for a particular assembly.  For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.



>
>		

This Bill of Materials is complete for the instructions that have been written.  More parts WILL be needed as more instructions are added.  I may have made mistakes, however. This page is automatically generated. Do not edit it. If you think you need to edit it, or have found a mistake, contact RussNelson. This BoM?? is best for locating parts needed for a particular assembly. For procuring parts, Zach's parts lister at http://parts.reprap.org/ is best, but I have to figure out how to import this into it.


Changes from the previous BOM to this one: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.54&rev2=1.3









  PonokoBedChainFitting 







Line: 29 to 31





  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle
  2 608Z skate bearing



 Added:   



>
>		

  1 625ZZNSK bearing






  5 M3 20mm screw
  2 M3 30mm screw
  4 M3 40mm screw



Line: 63 to 66





  6 M3 nut
  8 M3 washer
  8 M5 30mm screw



 Deleted: 



<
<		

  2 M5 Nyloc nut






  6 M5 nut



 Added:   



>
>		

  2 M5 nyloc nut






 16 M5 washer




Line: 189 to 192









 Added:   



>
>		


  PonokoZAxisTensioner 


  4 M3 12mm screw
  5 M3 20mm screw
  9 M3 nut
 14 M3 washer
  2 M5 ?mm screw
  4 M5 washer
  2 nut









  PonokoZFrameAssembly 


  8 8mm diameter 500mm long bright steel rod






Line: 223 to 238





  1 35mm piece of 10mm diameter PTFE rod with a 3mm hole drilled down the centre
  1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the middle
  7 608Z skate bearing



 Added:   



>
>		

  1 625ZZNSK bearing






 16 8mm diameter 500mm long bright steel rod
  3 8mm i/d compression spring approximately 16mm long



 Changed: 


<
<		

  8 M3 12mm screw



>
>		

 12 M3 12mm screw






 29 M3 16mm screw



 Changed: 


<
<		

 22 M3 20mm screw



>
>		

 27 M3 20mm screw






109 M3 25mm screw
 16 M3 25mm screw NEMA17
 13 M3 30mm screw
 20 M3 40mm screw
  3 M3 50mm screw



 Changed: 


<
<		

197 M3 nut



>
>		

206 M3 nut






 16 M3 nut NEMA17



 Changed: 


<
<		

364 M3 washer



>
>		

378 M3 washer






 32 M3 washer NEMA17
  6 M5 25mm screw
  4 M5 25mm screw NEMA23
 13 M5 30mm screw
  4 M5 50mm screw
 19 M5 8mm grub screw



 Changed: 


<
<		

  2 M5 Nyloc nut



>
>		

  2 M5 ?mm screw






 10 M5 grub screw
 50 M5 nut
  4 M5 nut NEMA23



 Changed: 


<
<		

  1 M5 nyloc nut
 32 M5 washer



>
>		

  3 M5 nyloc nut
 36 M5 washer






  8 M5 washer NEMA23
  1 M6 32mm o/d washer
  2 M6 dome nut



Line: 272 to 288





  1 gear motor
  2 hole socket strip
  4 large M3 washer



 Added:   



>
>		

  2 nut






  4 small, stout springs
  1 thick, solid, insulated copper wire




 Changed: 


<
<		

-- RussNelson - 14 Dec 2008



>
>		

-- RussNelson - 31 Dec 2008











View topic
 | Diffs  | r1.10 | > | r1.9 | > | r1.8
 | More

Revision r1.3 - 14 Dec 2008 - 20:44 - RussNelson

Revision r1.8 - 19 Jan 2009 - 05:55 - RussNelson