<<O>>  Difference Topic PonokoBedChainFitting (r1.11 - 11 Jan 2009 - VikOlliver)
META TOPICPARENT PonokoRepRap

Ponoko RepRap - Fitting The Bed and Z Chain

Line: 21 to 21

Parts for attaching the Bed to the Frame

Changed:
<
<		 The deposition Bed is lasercut from 8mm MDF (medium density fiberboard). It's fairly strong, has no wood grain, doesn't warm, and accepts deposition well. The Frame is lasercut from 8mm acrylic and has a hole in the center, which space is used for parts. The bed is mounted on three M8 25mm screws in three M8 holes arranged in a triangle. Orient the Bed on the Frame such that you can read the laser-etched "RepRap" and "Y-axis" at the same time. There is a notch in the side of the Bed which lines up with captive nut holes in the Bed Frame. The three M8 holes should now be lined up.
>
>		 The deposition Bed is lasercut from 8mm MDF (medium density fiberboard). It's fairly strong, has no wood grain, doesn't warm, and accepts deposition well. The Frame is lasercut from 8mm acrylic and has a hole in the center, which space is used for parts. The bed is mounted on three M8 60mm screws in three M8 holes arranged in a triangle. Orient the Bed on the Frame such that you can read the laser-etched "RepRap" and "Y-axis" at the same time. There is a notch in the side of the Bed which lines up with captive nut holes in the Bed Frame. The three M8 holes should now be lined up.


View topic | Diffs | r1.11 | > | r1.10 | > | r1.9 | More
Revision r1.10 - 01 Jan 2009 - 23:39 - VikOlliver
Revision r1.11 - 11 Jan 2009 - 05:29 - VikOlliver