<<O>>  Difference Topic PonokoCornerAssembly (r1.11 - 02 Jan 2009 - RussNelson)
META TOPICPARENT PonokoRepRap

Making the Ponoko RepRap Lower Corner Assemblies

Line: 41 to 41

Washer into Lower Corner Assembly.

Changed:
<
<		 Put a large M8 washer into the hole in the assembly.
>
>		 Put a large M8 washer into the hole in the assembly.


Single Corner Assembly with redux top

Changed:
<
<		 Pop the circular lasercut race on top of it and put the 4.5mm BBs into the eight holes.
>
>		 Pop the circular lasercut race on top of it and put the 4.5mm BBs into the eight holes.

Note that there are two variations in the cutting patterns. The larger one is in fact quicker to cut and is slightly stronger.

Changed:
<
<		 Alternatively, put in a 608 ZZ ball bearing race, wrapping with tape if necessary to form a snug fit.
>
>		 Alternatively, put in a 608Z skate bearing race, wrapping with tape if necessary to form a snug fit.

Changed:
<
<		 It is helpful to pop a washer and M8 bolt on top to stop the BBs falling out.
>
>		 It is helpful to pop a washer and M8 bolt on top to stop the BBs falling out.


View topic | Diffs | r1.11 | > | r1.10 | > | r1.9 | More
Revision r1.10 - 31 Dec 2008 - 23:24 - VikOlliver
Revision r1.11 - 02 Jan 2009 - 22:54 - RussNelson