<<O>>  Difference Topic PonokoUpperCornerAssembly (r1.8 - 02 Jan 2009 - VikOlliver)
META TOPICPARENT PonokoZMotorAssembly

Making the Ponoko RepRap Upper Corners

Line: 24 to 24

Attaching 8mm segment to Upper Corner

Changed:
<
<		 Attach the lower 8mm segment in a similar way using four M3 25mm screws and associated washers and nuts, and then add the BBs and bearing race like you did with the Lower Corners.
>
>		 Attach the lower 8mm segment in a similar way using four M3 25mm screws and associated washers and nuts, and then add the eight 4.5mm BBs

and bearing race like you did with the Lower Corners.

Actually, you don't have to assemble the bearings just yet - particularly if you find loaded bearings tricky things to deal with. You might find it easier to wait until later, when the Z Axis is assembled inside the supporting framework.

View topic | Diffs | r1.9 | > | r1.8 | > | r1.7 | More
Revision r1.7 - 31 Dec 2008 - 22:49 - VikOlliver
Revision r1.8 - 02 Jan 2009 - 20:44 - VikOlliver