<<O>>  Difference Topic PonokoYInstallation (r1.7 - 02 Jan 2009 - VikOlliver)
META TOPICPARENT PonokoRepRap

Ponoko RepRap - Installing The Y Axis

Line: 13 to 13

 Parts needed to fit the Y Axis The Y axis needs to be clamped between two uprights. One of the uprights are the 500mm rods which extend up through the Upper Corners. You'll add another post to the Upper Corners.
Added:
>
>		 The other upright rods can be anything 8mm diameter and over 70mm long. I'm using a mix of 80mm long, 8mm diameter smooth steel and M8 threaded rod offcuts.


Securing Y post with grub and nut

Changed:
<
<		 Secure the short Y post with two M5 nuts and two M5 8mm grub screws.
>
>		 Secure the 80mm long 8mm diameter steel Y post with two M5 nuts and two M5 8mm grub screws.

View topic | Diffs | r1.7 | > | r1.6 | > | r1.5 | More
Revision r1.6 - 17 Dec 2008 - 21:07 - RussNelson
Revision r1.7 - 02 Jan 2009 - 23:50 - VikOlliver