BlogPhotosFromVik < Main

Main.BlogPhotosFromVikr1.21 - 02 Jan 2007 - 14:51 - VikOllivertopic end

Start of topic | Skip to actions

Vik's Blog Photos

I need somewhere to put them that has non-crippled bandwidth, right?

-- VikOlliver - 03 Jun 2006

Mk2a RepRap Polymer Extruder Head:
RepRap Polymer Extruder Head" width="800" height="641" />

Second NZ RepRap under construction showing wiring.:
RepRap under construction showing wiring." width="800" height="600" />

Polymorph freehand moulding holding Mk2 extruder in place.:

The first RepRap part, just cooled.:
RepRap part, just cooled." width="640" height="471" />

Picture of first printed part with sprue etc. intact.:

Low res image oflogo from Vienna:

First working part actually fitted.:

Filled-in penguin for LCA 2007:

mov02791.mpg: Short movie of reprapped 16-tooth gears meshig

to top

End of topic
Skip to action links | Back to top

Attachment	Action	Size	Date	Who	Comment
test_extrusion_using_0.5mm_nozzle_sml.jpg	manage	69.4 K	03 Jun 2006 - 23:48	VikOlliver	A single layer test extrusion done with a 0.5mm nozzle.
polymorph_feedstock_jam_sml.jpg	manage	33.0 K	04 Jun 2006 - 00:16	VikOlliver	Polymorph feedstock jamming up and wrapping around the threaded rod.
two_layer_output_with_08mm_nozzle_sml.jpg	manage	48.2 K	04 Jun 2006 - 06:55	VikOlliver	Two layers of crosshatch and their parent 0.8mm nozzle.
mov02395.mpg	manage	2812.7 K	10 Jun 2006 - 03:36	VikOlliver	MPEG of deposition using 0.8mm nozzle @ 140C with 1.1mm x 0.8mm layers
deposition_on_glass.jpg	manage	14.5 K	10 Jun 2006 - 03:42	VikOlliver	Still from mov02395.mpg
small_shot_of_hexagon.jpg	manage	10.0 K	10 Jun 2006 - 04:25	VikOlliver	Small shot of hexagon deposited in mov02395.mpg
extrusion_of_hexagon_2nd_layer_closeup.jpg	manage	39.2 K	10 Jun 2006 - 06:54	VikOlliver	mov02395.mpg 2nd layer close-up of head
first_5mm_complete_product.jpg	manage	58.6 K	11 Jun 2006 - 19:15	VikOlliver	This is the first complete 5mm sample "Produced", and its attendant Tower of Ooze
defect_in_test_hex.jpg	manage	53.4 K	16 Jun 2006 - 09:25	VikOlliver	Shot of defect in 20mm hexagonal print test.
defected_test_hex_from_above.jpg	manage	48.9 K	16 Jun 2006 - 09:49	VikOlliver	The test hex, made using Adrians code, shown from above.
break_in_mk2_extruder_clamp_sml.jpg	manage	41.7 K	22 Jun 2006 - 08:13	VikOlliver	16mm clamp breakage on original Mk2 design
cooled_hex_vs_uncooled.jpg	manage	36.1 K	27 Jun 2006 - 06:07	VikOlliver	A cooled test hexagon (right) vs uncooled.
deposition_on_240_grit_sml.jpg	manage	40.4 K	05 Jul 2006 - 01:16	VikOlliver	Deposition made at 95C on P240 sandpaper
first_6mm_gripley_sml.jpg	manage	66.0 K	09 Jul 2006 - 04:29	VikOlliver	First 6mm linkage ("gripley") printed by RepRap.
polo_with_sprue_removed_sml.jpg	manage	50.6 K	17 Jul 2006 - 05:33	VikOlliver	Annular shape with sprue removed
first_attempt_at_pyramid_sml.jpg	manage	46.7 K	20 Jul 2006 - 07:38	VikOlliver	First attempt at depositing a flat-tipped pyramid
extruder_mk2a_sml.jpg	manage	62.0 K	25 Jul 2006 - 06:58	VikOlliver	Mk2a RepRap Polymer Extruder Head
stowable_reprap_in_progress.jpg	manage	91.5 K	12 Aug 2006 - 05:46	VikOlliver	Stowable version of RepRap under construction.
second_reprap_showing_wiring.jpg	manage	147.3 K	12 Aug 2006 - 23:49	VikOlliver	Second NZ RepRap under construction showing wiring.
polymorph_holding_mk2_extruder_sml.jpg	manage	84.6 K	13 Aug 2006 - 02:00	VikOlliver	Polymorph freehand moulding holding Mk2 extruder in place.
first_part_freshly_printed.jpg	manage	41.2 K	17 Aug 2006 - 16:32	VikOlliver	The first RepRap part, just cooled.
unadulterated_first_part.jpg	manage	50.5 K	17 Aug 2006 - 16:34	VikOlliver	Picture of first printed part with sprue etc. intact.
logo_fom_vienna.jpg	manage	70.6 K	12 Sep 2006 - 12:48	VikOlliver	Low res image oflogo from Vienna
first_selfmade_reprap_part_fitted.jpg	manage	57.9 K	23 Sep 2006 - 00:11	VikOlliver	First working part actually fitted.
filled_penguin.jpg	manage	48.2 K	17 Nov 2006 - 11:10	VikOlliver	Filled-in penguin for LCA 2007
mov02791.mpg	manage	2424.0 K	02 Jan 2007 - 14:51	VikOlliver	Short movie of reprapped 16-tooth gears meshig

You are here: Main > TWikiUsers > VikOlliver > BlogPhotosFromVik

to top