Skip to topic | Skip to bottom
Home"Wealth without money..."


Support This Project

  • Main Web
  • Changes
  • Changes detailed
  • Topic list
  • Search

    • login

    Main.Generation1Firmwarer1.1 - 26 Mar 2009 - 20:32 - ZachSmithtopic end
    Start of topic | Skip to actions

    Generation 1 Firmware

    Building the RepRap PIC firmware under Linux

    This page gives instructions on how to compile all the PIC firmware on a Linux system.

    Programming RepRap PIC chips

    This page gives instructions on how to use a conventional PIC programmer to do in-circuit programming of the PIC chips in the RepRap controllers above.

    Stepper motor timings

    This page describes how the PIC stepper controller boards do timing to get different stepper motor speeds.

    Extruder heater control and temperature measurement

    This page describes how the PIC extruder controller board senses temperatures and uses that information to control its heater.
    to top

    End of topic
    Skip to action links | Back to top

    Edit | Attach image or document | Printable version | Raw text | More topic actions
    Revisions: | r1.1 | Total page history | Backlinks | Refresh
    You are here: Main > Generation1Firmware

    to top

    Copyright © 1999-2009 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
    Ideas, requests, problems regarding RepRap? Send feedback