RUG/Pennsylvania/State College/Printers/PSU Unit White
|
Contents
Introduction
This is the page for the State College Rep Rap User Group's (SCRUG) White 3D printer. The printer was developed, assembled, and is currently operated by students in Penn State's Engineering Design 497J course and members of the 3D printing club. Our goal is to continuously tweak the printer until it is ready for distribution and sale to other departments in the University and local schools and businesses.
This printer is mainly comprised of white frame pieces with a few black pieces. Due to it having a heated bed we use one of ourATX PSU Dev Boards on it.
Log
Date | Modification / Problem |
---|---|
12/09/2013 | Thermistor is fixed temporarly by placing it under the tape |
12/06/2013 | Thermistor for the bed is loose and needs to be re-soldered. Currently the thermistor is under a washer on the bed, which gives a fairly accurate bed temperature reading. |
12/06/2013 | Extruder Gear skipping slightly |
09/03/2013 | X-Axis pulleys must be changed |
PSU Unit White - Current Condition
Print Problems And Solutions
|
|
|
|
|
|
|
|
|
|
|
|
Assorted Prints
Video
<videoflash type="youtube">NUG-33G0zaU?hd=1</videoflash>
Operators
This machine was assembled by:
- Nicholas Whalen
- Michael Testa
- Eric Kachel (Edk5035)
This machine was formerly operated by:
- Zihao Liu (Zzl5038)
- Chris Marcocci (Cjm5325)
- Di Wang
- Yongxi Chen (Yoc5166)
- Kunal Bansal
- Michael Bilyk (mbilyk)
This machine is currently operated by:
|