Mendel On Darwin
Mendel On Darwin
Release status: unknown
Description | Mendel X Axis on Darwin
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Images
FILE ID# | TYPE | DESCRIPTION | AVAILABLE FORMATS | CREATED/RESERVED BY |
---|---|---|---|---|
mendel_x-axis_on_darwin_002.tar.gz | These are openscad files. | Mendel-style x-axis on Darwin. | .tar.gz | --Timschmidt & Nick McCoy04:44, 27 October 2010 (UTC) |
Tim sayeth: Nick, a fellow MiRUG member, has had a Darwin running since forever, and he's had lots of trouble with his X axis / extruder carriage. We've put a fair amount of work into adapting the nicest (IMHO) Mendel X axis to Darwin.
Suggested Improvements
- One of the walls on the x-end-idler is not straight, it appears to have a notch cut into it. There is no reason for this.
- It is difficult to drill out one of the X-axis-rod holes because the motor mount interferes with the chuck from the drill. I had to drill it out with a hand drill from the other side because my drill press clamp is not tall enough the drill the hole from the other side.