Budaschnozzle
Revision as of 18:25, 7 September 2011 by Steven-AlephObjects (talk | contribs) (moved /LulzBot/Buddhaschnozzle to /LulzBot/Budaschnozzle: Spelling. D'oh)
BudaSchnozzle
Release status: Working
Description | Truly free/libre hot end
|
License | GPLv3
|
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | |
External Link |
Contents
Intro
- The BudaSchnozzle is a free/libre hot end.
- Inspired by the Arcol.hu Hot-end
Features
- Aluminum Block Resistor Hotend
- Easily assembled and torn down with no glue or ceramic
- Wire Strain Relief
- Includes machined aluminum and steel parts, and laser cut wooden parts
Specs
- Size: (H,W,L) 55mm, 40mm, 40mm
- Aluminum block resistor
- Machined aluminum heat block: 18.4mm x 25mm x 8.3mm
- Machined aluminum nozzle
- Thermistor temperature reading: Honeywell 135-104LAG-J01
- Resistor heating element: Vishay RWM06226R80JA15E1
- Aluminum and copper heatsink
- PEEK GF30 insulator
- PTFE inner sleeve
- Laser cut hard wood plates
- Machined stainless steel back-up plate
Special Notes
- A custom created thermal table has been created for the Honeywell 135-104LAG-J01 thermistor for use with the Buddhaschnozzle. The thermal table will be added to Sprinter firmware shortly [hint, hint]