FilamentReviewsUltimachine
| Date | Material(s) | Shape/Delivered | Thickness (mm) | Measured thickness (mm) | Quantity | Delivered amount | Costs (kg) | Costs (Meter) | Destination & shipping costs | Rating 0-10 | Additional notes & Signed by |
|---|---|---|---|---|---|---|---|---|---|---|---|
| March 2014 | PLA | round | 1.75mm | n/a | 2lbs (0.9kg) | 2lbs | USD 46/kg | n/a | U.S. Priority Mail $19.45 (Flat Rate; together with other items) | 8/10 | Very good filament. Ordered 2x 1lb packs not on spools and ultimately returned the unopened pack because it's impossible to use filament without a spool. |
| March 2014 | Polycarbonate | round | 1.75mm | n/a | 1lb (0.45kg) | 1lb | USD 89/kg | n/a | U.S. Priority Mail $19.45 (Flat Rate; together with other items) | 7/10 | Good consistent extrusion with my Felix 2.0. However I was unable to ever get a truly clear print even though I live in Nevada with low humidity. I may try a food dehydrator at some point. |
