P3Steel Electronics and wiring

From RepRap
Revision as of 05:33, 13 October 2014 by Traumflug (talk | contribs) (No need to limit this to just one controller.)
Jump to: navigation, search

Any controller complying to RIS 1 will work. The recommended electronics for the P3Steel is the ubiquitous Arduino Mega 2560 + RAMPS 1.4 combination, used in exactly the same way as in many other Prusa i3 derived 3D printers.


P3Steel and electronics, wiring


The Arduino Mega 2560 + RAMPS 1.4 + A4988 drivers + 80mm fan as used in the P3Steel make for a neat stack and this combination is very well documented in this wiki:


Arduino + RAMPS + 80mm fan


To avoid duplicating the excellent information available in this wiki, check:


- The Prusa i3 Rework electronics and wiring page.

Retrieved from "https://reprap.org/mediawiki/index.php?title=P3Steel_Electronics_and_wiring&oldid=133839"