RUG/Pennsylvania/State College/Printers/PSU Unit Yellow
Introduction
This page is dedicated to the PSU Unit Yellow 3D printer. This unit will follow the design of the Open Hybrid Mendel developed by students of the EDSGN 497 class at The Pennsylvania State University.
This printer is mainly comprised of yellow frame pieces. The Z axis motors are a unique green color because those parts were printed on the makerbots in the PSU Learning Factory.
Operating Specifications
Operating Specifications | |||||||
---|---|---|---|---|---|---|---|
Name | Status | Design | Electronics | Firmware | Extruder | Running Temp | Comments |
Yellow | Not complete | Ohm | RAMPS | ??? | ??? | ???C |
Work in Progress
-Frame- The frame of the printer has be completed. The y axis bed frame has also been finished and needs installed. An entruder has been printed and assembled and is waiting for the x axis to be finished. -Electronics- The Ramps board has been soldered and mounted on the frame. It is missing some motor drivers because some were robbed to provide working driver boards for the [PSU Unit Rainbow| Rainbow] and [Orange 2| Orange 2] printers.
Builders
Spring 2013 Yellow team:
Btz5006, Djl5217, Vatlark, MarkKeller22
|