RepRap Samuel
Revision as of 12:29, 5 October 2014 by Silpstream (talk | contribs) (Created page with "{{Languages}} {{Development |name = Samuel |status = working |description = Silpstream's Augmented Mendel a.k.a Samuel |license = GPL |author = silpstream |reprap = Pru...")
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Release status: working
| Description | Silpstream's Augmented Mendel a.k.a Samuel
|
| License | |
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
Contents
Introduction
RepRap Samuel is designed to reuse the vitamins and some parts from the Prusa Mendel i2 or the Mendel. As such, an owner of either of the RepRaps should be able to print the new parts on their existing 3D printer to rebuild it into Samuel. It's design objectives are:
- Reuse vitamins and parts from RepRap Mendel
- Increase build volume in the Z-axis
- Improve X-motion stability
- Upgrade X-axis to newer vertical designs
Specification
- Size: 420x420x440mm
- Build Volume: 196m x 196 mm x 200mm
- 5 x NEMA 17 motors
- Electronics: Should work with most RepRap electronics
- Structural materials: M8 rods, ABS/PLA
Parts
You can find all files on GitHub.
Build
Coming soon.
