Upload log
Below is a list of the most recent file uploads. See the gallery of new files for a more visual overview.
(newest | oldest) View (newer 100 | older 100) (20 | 50 | 100 | 250 | 500)- 18:16, 4 April 2024 VikOlliver (talk | contribs) uploaded File:Mk2 experimental 20240401 141636 386.jpg (Second experimental platform for μRepRap using indirect lighting stage, robust probe arm, and feet with endstop switches.)
- 00:20, 1 April 2024 VikOlliver (talk | contribs) uploaded File:First square with M3 2024-04-01 14-07-00.jpg (Markings in Sharpie on a microscope slide etched with a 1.0mm square enclosing a 0.5mm square. Lower right shows fragment of M3 screw thread with 0.5mm pitch for scale.)
- 20:12, 12 March 2024 VikOlliver (talk | contribs) uploaded File:2024-03-13-084007 annotated.jpg (Annotated image showing deposition made with a 40μm hypodermic tip.)
- 03:29, 11 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap logo.png (RepRap logo with a micron in the middle)
- 00:24, 7 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap first test rig.jpg (Initial test rig using OpenFlexure Delta stage with a single functional stepper and a wire probe being observed through a microscope.)
- 23:51, 6 March 2024 VikOlliver (talk | contribs) uploaded File:Probe tip and hypodermic.png (Tip of a 24 gauge hypodermic needle (right) and an electrically etched probe top with a tip radius of approximately 0.25µm)
- 04:31, 23 February 2024 Simon.pilepich (talk | contribs) uploaded File:Ratrig.jpg
- 02:22, 23 February 2024 Simon.pilepich (talk | contribs) uploaded File:Voron.jpg (Voron 0.2)
- 17:45, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Stage one complete.png
- 17:44, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 before.png
- 17:44, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 after.png
- 17:32, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 after image 2.png
- 17:32, 20 February 2024 Seumag (talk | contribs) uploaded File:Pld sap flanges.png (more up to date version of the design)
- 17:29, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 4b before.png
- 17:27, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 4a after.png
- 17:26, 20 February 2024 Engineeringfeind (talk | contribs) uploaded a new version of File:Step 2 after.png
- 17:24, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 2 after.png
- 14:39, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape mech.jpg (tape mechanism with apertures)
- 14:38, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape aperture cut.jpg (apertures being cut)
- 14:37, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape aperture det.jpg (Details of aperture cut onto tape)
- 14:36, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape apertures.jpg (example of apertures cut onto the tape)
- 11:10, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism depo.png (PLD-SAP mechanism, during deposition)
- 11:09, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism cut.png (PLD_SAP diagram, cutting masks)
- 11:00, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism side.png (Diagram of main mechanism)
- 10:22, 16 February 2024 Seumag (talk | contribs) uploaded File:PLD Cale.png (CAD Design, full)
- 09:54, 16 February 2024 Seumag (talk | contribs) uploaded File:Aligner Scheme.png (Diagram explaining the alignment mechanism)
- 09:51, 16 February 2024 Seumag (talk | contribs) uploaded File:Inertial slider.jpg (Prototype for the tape adjusting mechanism)
- 09:48, 16 February 2024 Seumag (talk | contribs) uploaded File:Ajuste cinta.png (tape adjusting mechanism, cad)
- 09:18, 16 February 2024 Seumag (talk | contribs) uploaded File:Mask cut.png (mask aperture cutting)
- 09:18, 16 February 2024 Seumag (talk | contribs) uploaded File:Tape fab.png (mask's tape fabrication process)
- 09:16, 16 February 2024 Seumag (talk | contribs) uploaded File:Carrusel.png (Target carrousel design for the first implementation)
- 09:15, 16 February 2024 Seumag (talk | contribs) uploaded File:Mec cinta.png (tape driving mechanism for the first implementation)
- 09:14, 16 February 2024 Seumag (talk | contribs) uploaded File:PLD flange.jpg (overview of first implementation)
- 17:06, 15 February 2024 Seumag (talk | contribs) uploaded File:PLD standard in.jpg (View into the chamber)
- 17:03, 15 February 2024 Seumag (talk | contribs) uploaded File:Pld v0 setup.jpg (Standard configuration of the old PLD setup)
- 16:38, 15 February 2024 Seumag (talk | contribs) uploaded File:BCTG process.png (Naive fabrication process by MM-PLD)
- 16:37, 15 February 2024 Seumag (talk | contribs) uploaded File:BCTG.png (naive diagram of BCTG TFT)
- 16:35, 15 February 2024 Seumag (talk | contribs) uploaded File:Pld sap front.png (PLD-SAP CAD front view)
- 15:42, 15 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 2 hotend dissasembly.png
- 01:39, 15 February 2024 Hammersamatom (talk | contribs) uploaded File:Klipper logo.png (Logo of the Klipper firmware project)
- 23:18, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step two coupler dissasembly.png
- 23:16, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step two dissasembly.png
- 22:24, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:DCS00264.png
- 22:15, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:DCS00263.png (a before photo for Cu1 printer assembly instructions)
- 10:26, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 10:22, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 10:19, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 07:25, 25 June 2023 Adrianbowyer (talk | contribs) uploaded File:Science-museum.jpg
- 18:58, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Template Cairo30 3D Printer Image.jpg
- 18:57, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 feature01.jpg
- 18:26, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3D Printer Front Image.jpg
- 18:22, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3D Printer Side Image new edited.jpg
- 05:24, 30 April 2023 Daniel Massicotte (talk | contribs) uploaded File:Dir.jpg (Easy to read Directory from printer SD Card seen on Repetier-Server with the command DIR.)
- 02:54, 27 April 2023 Alexbrowns (talk | contribs) uploaded File:A Lead Compound with Multiple Pharmacological Activities.jpeg (Zaprinast is a cGMP-specific phosphodiesterases (PDEs) inhibitor and the lead compound of sildenafil, a potent and selective PDE5 inhibitor and an active drug in the treatment of erectile dysfunction. PDEs hydrolyze the cyclic phosphate bond in cyclic...)
- 15:55, 27 March 2023 Mechadense (talk | contribs) uploaded a new version of File:ReChainConcept Screenshot 20220922 155651.png (Author: Lukas M. Süss aka Mechadense <br> Description: Conceptual sketch of a RepRec System <br> License: CC-BY-SA-4.0)
- 15:44, 27 March 2023 Mechadense (talk | contribs) uploaded File:ReChainConcept Screenshot 20220922 155651.png (Author: Lukas M. Süss aka Mechadense <br> Description: Conceptual sketch of a RepRec System <br> License: CC-BY-SA-4.0)
- 02:49, 24 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dproject 45degprinting.jpeg (GA3DProject 45deg infinite printing module just to add on the base machine)
- 12:56, 18 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:GA3D Project Lugh.jpeg (A new species of reprap : The GA3D Lugh project... under CERN OHL-W v2 design slowly improved)
- 12:34, 18 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:SmartGA3D unloadingloadinfilament B.jpeg (GA3D smart unloading/loading filament mechanism licensed under CERN OHL-W v2)
- 12:33, 18 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:SmartGA3D unloadingloadinfilament A.jpeg (GA3D smart unloading/loading filament mechanism licensed under CERN OHL-W v2)
- 12:55, 9 March 2023 Mechadense (talk | contribs) uploaded File:MotorBackpackOptions.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC0 <br> '''Description:''' <br> Avoiding moving motors relative to each other puts them all at the same spot in the kinematic chain as a "motor backpack" thereby causing different nece...)
- 08:04, 9 March 2023 Cyber (talk | contribs) uploaded a new version of File:Modificado.jpg
- 07:52, 9 March 2023 Cyber (talk | contribs) uploaded a new version of File:Modificado.jpg
- 08:33, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec-Project-overview.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA-4.0 <br> '''Date:''' 2022-11-23 <br> '''Description:''' tl;dr ~ possibly the briefest possible overview over the RepRec Project. <br> Using closest existing analogous work for...)
- 08:02, 8 March 2023 Mechadense (talk | contribs) uploaded File:ReMecComponentsInfos A4-170dpi.jpg ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA-4.0 (see on image) '''Description:''' <br> Overview over various RepRec/ReChain system components that made it to the 3D-printing prototyping phase.)
- 07:25, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec ViciousToVirtuousCycle Screenshot 20230308 122129.png (added the influence of part-size variation on vitamin count <br> Screenshot_20230308_122129)
- 06:49, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec ViciousToVirtuousCycle Screenshot 20230308 114028.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA-4.0 <br> '''Date:''' 2023-03-07 <br> '''Description:''' <br> How adding RepRec systems may turn <br> – a vicious cycle that leads to zenralized production into <br> – a vi...)
- 06:30, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec HighlyConceptualSketch newer Screenshot 20230308 110119.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA <br> '''Date:''' paper-sketch 2022-06; digitized & published 2023-03-08 '''Description:''' <br> Highly conceptual sketch of a RepRec-crawler hanging from one dimensional pair...)
- 23:20, 3 February 2023 MrotingMan (talk | contribs) uploaded File:43.jpg (The front portion of the Parabilis (ScribbleBot))
- 17:23, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3d-printer v55 back.jpg
- 17:23, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3d-printer v55 side.jpg
- 17:22, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3d-printer v55.jpg
- 17:17, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 Machine Featured.jpg
- 01:54, 4 January 2023 SarahHuston (talk | contribs) uploaded File:Post 9 (1).jpg (Mate Mate natural energy drink is leading energy drink with wellmune and has natural caffeine and low sugar content to avoid harmful effects of energy drink and healthy for your everyday energy needs. This is the first energy drink with Wellmune which...)
- 16:41, 29 December 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D M2.jpeg (Layout of the GA3D M2)
- 06:45, 22 November 2022 Danmas (talk | contribs) uploaded File:Druid Logo.png (Official Druid Firmware logo)
- 10:10, 24 September 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech45deg.jpeg (45° infinite printing module extension)
- 03:46, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:05displayMount.jpg (Prusa i3 StarWars Edition display & RAMPS instaling)
- 03:44, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:04ATXpowerSupply.jpg (Prusa i3 StarWars Edition ATX power supply&stiffening rib)
- 03:39, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:03BlackMatt.jpg (Prusa i3 StarWars Edition after painting)
- 03:37, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:02checkGeometry.jpg (Prusa i3 StarWars Edition assembly and geometry check)
- 03:36, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:01laserCuttedPlywood6mm.jpg (Prusa i3 StarWars Edition lase-cutted plywood parts)
- 03:08, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:00header1.jpg (Prusa i3 StarWars Edition ready)
- 03:05, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:00header.jpg (Prusa i3 StarWars Edition)
- 03:13, 6 September 2022 Ctkjose (talk | contribs) uploaded File:3D Printer FDM common endstop wiring circa 2020.png
- 06:22, 20 August 2022 Alvon3DprinTor (talk | contribs) uploaded File:RollingThreadExtruder Concept GA3Dtech.jpeg (Rolling Thread Extruder Concept)
- 04:52, 11 August 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3DtechM1 45degmodule.png (GA3DtechM1 45deg module)
- 02:37, 24 June 2022 Bangalitantrik (talk | contribs) uploaded File:Bengali.png (Love relation problem solution can be of different types. These solutions are useful for people who are married, for people in love but they feel their love is not as they expected. https://www.bengalitantrik.com/love-relationship-problem-solution-beng...)
- 22:47, 17 June 2022 Felipe Dachshund (talk | contribs) uploaded a new version of File:Estrutura de componentes de uma RepRap.png (Minor changes (spelling))
- 17:28, 16 June 2022 Felipe Dachshund (talk | contribs) uploaded File:Conjunto de ferramentas RepRap.jpg (Guia do Conjunto de Ferramentas RepRap)
- 10:36, 16 June 2022 3D Robot (talk | contribs) uploaded File:Prototype0.png (This is one of the first prototypes. Notice that it only has one arm. All of the motions work and so does the connect. But it is not fully functional yet.)
- 10:22, 16 June 2022 3D Robot (talk | contribs) uploaded File:Completerobot.png (A rendering of the complete robot, details may very but the idea is the same.)
- 01:12, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini closeup edited ag.jpg
- 01:11, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini closeup edited2 ag.jpg
- 01:10, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini main2 edited ag.jpg
- 01:08, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini main edited ag.jpg
- 16:48, 7 June 2022 Felipe Dachshund (talk | contribs) uploaded File:Estrutura de componentes de uma RepRap.png (Estrutura dos componentes de uma impressora RepRap)
- 18:06, 20 May 2022 CherHubert (talk | contribs) uploaded File:SollarCell.png
- 18:02, 20 May 2022 CherHubert (talk | contribs) uploaded File:CarBattery.jpg
- 17:54, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold Illustration002-FullHD.jpg