Search results

Create the page "Warping" on this wiki! See also the search results found.

• Darwin/Thermoplast Extruder
  ...n-bag-duck.html We are looking at solutions to this,] but for these parts, warping doesn't matter anyway! The reason is that it curls the bottoms of the part
  38 KB (6,703 words) - 17:54, 13 October 2013
• Host software Variations
  * create a raft first (against warping / curving of your object)
  4 KB (661 words) - 18:47, 13 July 2015
• ABS
  ...ng abs in acetone and spraying it on the bed before printing prevents part warping too and is fast to apply giving a very uniform surface.
  4 KB (652 words) - 16:48, 3 January 2021
• Mendel materials preparation
  ...is an [[Mendel_heated_bed |alternative heated bed here]] that will reduce warping of parts when you print them (especially if you print a lot at once, like w
  3 KB (532 words) - 12:38, 1 December 2015
• Mendel/Files
  ...at once. Some with the smaller parts holding down the larger ones against warping. 2 Examples are [http://www.thingiverse.com/thing:1884 here] and [http://ww
  5 KB (689 words) - 11:26, 1 December 2015
• Scaling
  * Scaling the in-process build may have issues with warping, thermal expansion, and temperature control. A [[Heated Bed]] can help con
  12 KB (2,021 words) - 20:44, 7 January 2020
• Heated Bed
  ...occur throughout a printed part evenly, the result is a warped part. This warping is commonly seen as corners being lifted off of the build platform. Printin You should let the Heated Bed and piece cool down to avoid warping.
  31 KB (5,100 words) - 21:49, 11 November 2018
• Pirated CupCake
  ...rotation of the tooth profile into a circle, and modified it to work with warping and stretching. Then we just lazzored them out of thin acrylic, and fused t ...n 2cm square, so we opted to build a heated plate to reduce the effects of warping.
  24 KB (3,862 words) - 23:34, 19 November 2013
• McWire (Death March: Do not build!!!)
  ...ylic, but you can use virtually any material that is flat and not prone to warping. Examples include: MDF, Aluminum Plate, or Steel Plate.
  16 KB (2,625 words) - 05:11, 8 September 2013
• Craftbot
  Heatable build platform, no bending or warping
  4 KB (642 words) - 22:23, 21 December 2015
• Team Replicant
  ...is will enable to unit to act like a reflow oven and to minimize or reduce warping (as shown by many others).
  4 KB (695 words) - 18:38, 19 March 2014
• Glossary
  ...ded part from cooling (and shrinking) too quickly. Such shrinking leads to warping internal stresses in RP parts. The most common result is corners of parts l A heated build chamber is typically sealed and heated to prevent warping during the printing process.
  17 KB (2,687 words) - 22:10, 8 November 2021
• HDPE
  Larger and longer objects are likely to have more warping.
  3 KB (522 words) - 12:24, 18 March 2021
• BasicMendel
  ...e to warping of Plywood even high quality laser Plywood and MDF had slight warping (>0.5mm)
  8 KB (1,353 words) - 09:40, 18 September 2015
• Waxuum
  ...othing effect of the hot needle moving over the wax. There are also fewer warping, delamination, and anisotropy problems.
  8 KB (1,323 words) - 00:29, 1 September 2013
• BlueTape
  ...so unlike acrylic blue tape can be used in such a way that build platform warping is not an issue.
  2 KB (342 words) - 11:17, 3 May 2011
• Mendel heated bed
  ...surface. I can build entire trays of parts under those conditions with no warping.
  13 KB (2,361 words) - 21:26, 8 December 2013
• Feedstock
  ...de from corn starch. It prints very well and produces parts with almost no warping at all. It is harder and more brittle than ABS. It is colourless and clear.
  1 KB (245 words) - 15:09, 13 July 2012
• Huxley Seedling
  ...e to warping of Plywood even high quality laser Plywood and MDF had slight warping (>0.5mm) This thickness of Acrlic is needed to prevent warping of the Acrlic.
  9 KB (1,536 words) - 09:21, 18 September 2015
• MegaMendel
  ...but I have not yet tried to use the full build area. This is due to severe warping issues with my ABS plastic. I will try with PLA at some time to see how tha Some people say "heated bed" when the talk comes to warping, but I have decided not to go for that solution, the main reasons being:
  21 KB (3,936 words) - 10:31, 17 June 2016
• MetalicaRap
  ...tricky to print; the first layer must weld well to metal base to stop part warping, because cold platform contact hot metal residual stress tries to snap buil
  168 KB (26,821 words) - 07:28, 3 July 2023
• Elegant multispline motion controller
  * keep [[Heated Bed]] at the right temperature to prevent warping.
  29 KB (4,689 words) - 15:45, 4 January 2015
• Build a RepRap
  ...ated bed, parts have a tendency to cool down too quickly. This results in warping of corners (as the plastic shrinks while cooling) or the part physically de
  22 KB (3,604 words) - 01:21, 27 March 2024
• Bed material
  *Electrical tape - sticks, but not well enough to stop warping. *Acrylic Sheet - works! ABS sticks to it quite nicely; I had some warping, but I only used 1.5 mm thick Acrylite FF P99 Acrylic Sheet from Cyro Indus
  13 KB (2,190 words) - 22:22, 16 April 2016
• Exquisite Automated Build Platform
  ...development project, however with any conveyor belt there are issues with warping, lift, and weight issues. If these were overcome perhaps development would ...a flat surface, and be designed sturdy enough to print for 100hrs without warping or adjustment
  11 KB (1,993 words) - 03:18, 14 February 2024
• Syringe Pump Metal Extruder
  ...not leak under the part. In general, the heated plate seems to help avoid warping, but the downside is that the bottom of the part starts to ooze outwards af
  8 KB (1,270 words) - 14:38, 22 January 2011
• OpenX
  ...structure is bellow the rails, putting it close to the hot end and risking warping from the heat plume.
  8 KB (1,446 words) - 08:48, 16 October 2013
• OpenY
  ...330 bearings onto the rails. currently, if it's way too loose, maybe from warping, you need to adjust a sketchup file and reprint something ...ith most of the RP parts below the rails. this would hopefully prevent any warping or distortion, but would require a greater redesign effort, and would proba
  7 KB (1,340 words) - 21:56, 14 December 2012
• RUG/Pennsylvania/State College/Printed Quadcopter
  ...parts are very large and flat, so extra caution should be taken to prevent warping during printing. The two sets of arms should be printed in two different co
  4 KB (535 words) - 11:14, 27 October 2014
• RAMPS 1.2
  ...inted in PLA. There is talk that it is currently unprintable in ABS due to warping.
  33 KB (5,279 words) - 13:40, 1 May 2013
• Mattroberts' Heated Bed
  ...ess (see left photo). In order to increase the grip (and therefore reduce warping) I sanded the stainless with some 150grit sandpaper, the result is a durabl
  3 KB (438 words) - 14:45, 12 November 2011
• Heated Bed Theory
  ==Warping== So far, there is no real countermeasure against warping, other than to apply this to a fairly thick sheet of aluminium, which is ex
  8 KB (1,292 words) - 08:01, 9 November 2013
• Concept multimaterial laser printer
  ...1998-40-Klingbeil.pdf. Measurement and Modeling of Residual Stress-Induced Warping in
  140 KB (23,495 words) - 23:10, 30 October 2013
• Vlad Tepes
  ...bearing clamps - M4 threads still. This revision might be better regarding warping. Added rectangle reinforcements each sides for printing. || [[File:Zb02.jpg
  32 KB (5,398 words) - 03:22, 13 May 2014
• Polycarbonate
  To limit problems with bed adhesion and warping, formulations adapted to printing may be used. ...C. Higher chamber temperatures might further reduce part delamination and warping, but it hasn't been tested by me.
  9 KB (1,518 words) - 12:24, 24 August 2016
• The incomplete RepRap Prusa Mendel beginner's guide
  ...ommon way of printing ABS. It provides good adhesion and keeps parts from warping. |Warping
  103 KB (16,604 words) - 18:55, 17 October 2020
• Triffid Hunter's Calibration Guide
  # not exhibit 'hourglass' warping, and
  18 KB (3,052 words) - 17:02, 31 December 2018
• Printing quality
  ...ded part from cooling (and shrinking) too quickly. Such shrinking leads to warping internal stresses in RP parts. The most common result is corners of parts l
  1 KB (155 words) - 02:05, 23 May 2015
• LulzBot/AssembledPrusaMendel/gettingstarted
  ...d plastic stick to the print surface. PET film greatly helps in preventing warping. ...ssolved in Acetone wiped onto the print surface will almost guarantee zero warping. The mixture we generally use is 1 meter of 3mm plastic per 350 milliliters
  14 KB (2,517 words) - 12:37, 14 March 2012
• Prusa i3
  ...se of materials such as [[ABS]] and nylon which can experience significant warping if printing on a cold platform.
  10 KB (1,475 words) - 05:24, 24 February 2019
• Huxley PCB Heatbed
  ...sed as heater for build surface. Enables printing of large objects without warping.
  2 KB (306 words) - 08:00, 4 September 2014
• RepRapPro Huxley print settings
  ...Tech White ABS || 110C || 220C || Sticks well to Kapton and glass with no warping
  627 bytes (98 words) - 07:17, 5 November 2012
• FilamentEsunplaReviews
  * Not much warping encountered so far with a glass bed at room temperature, only on large prin
  5 KB (883 words) - 11:51, 19 March 2014
• SLS wax printer
  | [[Image:Wax_gear.png|frame|none|Solid wax sprocket gear. Note the thermal warping around the perimeter.]] ==Thermal Warping==
  19 KB (3,071 words) - 13:53, 11 September 2018
• Tantillus
  ...rsion was designed with openings to relieve stress but it too was prone to warping and cracking in ABS. Some warping is acceptable but should be avoided if possible. The top four case parts ar
  13 KB (1,839 words) - 16:38, 12 December 2016
• Mendel90
  ...ether throughout the machine, instead of just at the corners, so much less warping
  5 KB (861 words) - 11:43, 1 February 2016
• RepRapPro Mendel z axis assembly
  ...tension may result in a more stable belt, but care must be taken to avoid warping the rig.
  11 KB (1,884 words) - 05:19, 9 July 2013
• RUG/Pennsylvania/State College/Printers/PSU Unit Silver
  ...of Silver is very fast. However, due to the bad quality of Open-X carriage(warping), Silver right now cannot print perfectly circular parts. The open-x carria
  2 KB (249 words) - 20:33, 10 April 2014
• Portabee
  ...ruding arm, which is prone to separating from the bed and curling upwards (warping). To prevent this, use a large brim around the entire part. Also, print ano ...lso help when printing this part, to prevent excessive cooling and prevent warping. However, the standard Portabee electronics can only heat the bed to about
  84 KB (14,171 words) - 06:48, 19 February 2023
• FilamentReviewsUltimachine.com
  ...nt quality filament. Sticks extremely well to kapton tape which helps with warping. Im getting beautiful prints with this stuff and its not half as runny as s
  2 KB (295 words) - 12:04, 19 March 2014
• Clone wars: Glosario/es
  === Warping (curvatura de la piezas) === ...cama caliente de la pieza a imprimir. Utilizado para minimizar el temido "warping".
  36 KB (6,205 words) - 13:50, 25 November 2015
• AWARD BED/en
  ...eformation of the object printer that mean a bad print.In fact AWARD -Anti Warping And Retraction Deformation- try to prevent this problem
  3 KB (474 words) - 08:52, 6 September 2012
• AWARD BED/it
  ...della plastica che porta al distaccamento del pezzo dal piatto.AWARD-Anti Warping And Retraction Deformation-quindi cerca di prevenire questo tipo di proble
  3 KB (474 words) - 08:53, 6 September 2012
• Zmorph
  ...ily equipped with chamber that keeps the prints warm enough to prevent any warping.''' Working area is larger than in traditional RepRap, and is currently 210
  2 KB (290 words) - 10:33, 17 June 2016
• Prusa i3 Build Manual
  ...ing to that surface after cooldown. Uneven moisture content is what CAUSES warping, so this is a bad idea.
  14 KB (2,171 words) - 08:32, 17 March 2016
• Helios PCB Heatbed
  ...traces. The PCB is 1/8” thick (2x that of the regular beds) to minimize warping and provide rigidity to allow mounting flexibility.
  2 KB (358 words) - 19:49, 9 November 2012
• Prusa i3 Buyers Guide
  ...ing to that surface after cooldown. Uneven moisture content is what CAUSES warping, so this is a bad idea. ...r especially tall/thin parts, a heated build chamber can be used to reduce warping. If using an aluminum frame, you may want to [[Heated_bed#Thermal_Insulatio
  44 KB (6,727 words) - 11:30, 29 April 2020
• RUG/Pennsylvania/State College/Razor Blade Designs
  ...e tabs can be easily removed and the holder can be printed without fear of warping.
  6 KB (1,122 words) - 05:21, 28 August 2018
• RUG/Pennsylvania/State College/Trouble Shooting Guide
  <td>Your object experiences "warping"</td> <td>Your first print layer is thin, squished, or warping immediately.</td>
  14 KB (2,435 words) - 23:50, 26 February 2015
• SharebotPro
  http://www.makerbot.com/blog/2011/06/23/12-ways-to-fight-warping-and-curling/
  11 KB (1,688 words) - 10:27, 5 June 2013
• Jason Mendel
  ...for the use of materials such as [[ABS]] which can experience significant warping if printing on a cold platform.
  2 KB (351 words) - 07:54, 30 November 2014
• Print Troubleshooting Pictorial Guide
  |problem01=Part warping and delamination as print progresses. ====Warping====
  29 KB (4,254 words) - 15:43, 14 March 2021
• RUG/Pennsylvania/State College/Printers/PSU Mcd
  ...large cooling fan. It is used to cool the extruded plastic in case of its warping. Another smaller fan is used to cool down the y motor. ...large cooling fan. It is used to cool the extruded plastic in case of its warping. Another smaller fan is used to cool down the y motor. The only issue about
  10 KB (1,626 words) - 20:35, 9 December 2014
• Laybrick
  • Warping can almost be considered as excluded
  1 KB (167 words) - 20:33, 27 December 2014
• DIY Selective Laser Sintering FAQ
  ...to do some LS work with just laser heating, it will be extremely prone to warping/curling/fouling etc. By doing most of the heating externally, you're also a
  16 KB (2,561 words) - 16:58, 23 May 2019
• Lava Bot
  ...red water and oil as a warm printing bath for plastic printing to minimise warping, it covers some of the same concepts almost a year ago and refers to earlie
  5 KB (812 words) - 05:47, 15 May 2017
• Glossary/kr
  ...ded part from cooling (and shrinking) too quickly. Such shrinking leads to warping internal stresses in RP parts. The most common result is corners of parts l A technique used to prevent warping. Parts are built on top of a 'raft' of disposable material instead of direc
  11 KB (1,228 words) - 20:08, 22 May 2020
• Triffid Hunter's Calibration Guide/es
  # not exhibit 'hourglass' warping, and
  18 KB (3,016 words) - 09:12, 29 July 2015
• Glossary/it
  ...La contrazione dovuta al raffreddamento, infatti, accentua il fenomeno di warping (''vedere alla voce '''Deformazione''''') che deforma il pezzo stampato con
  5 KB (716 words) - 09:09, 15 July 2014
• HackerBot User Manual
  * Large objects suffer warping Also PLA suffer less ''warping'' and heatbed is not needed
  5 KB (791 words) - 07:38, 25 May 2016
• RepRap Options/he
  ...ated bed, parts have a tendency to cool down too quickly. This results in warping of corners (as the plastic shrinks while cooling) or the part physically de
  25 KB (4,097 words) - 08:06, 21 May 2018
• Heated Build Chamber
  ...was rather easy and cheap. I can only recommend this way to anyone having warping problems or trouble with the fumes and not wanting to spend two months buil ...ing similar! No smell of ABS (which was quite a problem before), much less warping and cleaner, safer and contained worplace for the machine.
  9 KB (1,554 words) - 17:34, 22 April 2020
• Glossary/cs
  ...hladnutí způsobuje nežádoucí smršťování předmětu, ohýbání (''warping'', zejména rohů) a vytváření vnitřního pnutí. Napomáhá také k ud Technika používaná k zabránění ohýbání modelu (''warp'',''warping'') chladnutím při tisku. Tištěný objekt se umístí až na 'raft' z od
  17 KB (3,035 words) - 13:09, 14 July 2014
• RUG/Pennsylvania/State College/Printers/Thing-O-Matic
  |Parts warping badly. Strange settings issues.
  2 KB (215 words) - 16:31, 3 May 2014
• Heated Bed/ru
  You should let the Heated Bed and piece cool down to avoid warping.
  26 KB (3,397 words) - 10:35, 2 November 2018
• RepRap Options/ja
  ...ated bed, parts have a tendency to cool down too quickly. This results in warping of corners (as the plastic shrinks while cooling) or the part physically de
  28 KB (4,291 words) - 08:05, 21 May 2018
• RDB-STPTS-002-DIY
  ...place; also use just 1mm2 solid conductor, exagerating its size makes the warping worse.
  11 KB (1,710 words) - 03:47, 7 November 2014
• Resources
  ...ated bed, parts have a tendency to cool down too quickly. This results in warping of corners (as the plastic shrinks while cooling) or the part physically de
  26 KB (4,264 words) - 14:25, 2 December 2022
• ABS/es
  ...ligera contracción al enfriarse, lo que causa el efecto denominado [[warp warping]] especialmente en piezas muy alargadas o con gran densidad de material de ...cama caliente antes de la impresión ayuda a fijar la pieza y prevenir el warping.
  4 KB (570 words) - 06:43, 14 January 2015
• PCB Heatbed/Aluminium Bed Mount Plate/Borosilicate glass
  ...help your printing platform to be a heated surface perfect for minimizing warping of larger prints.The heating element is on the bottom side. The heating is ...d improves print quality, especially when printing ABS by reducing thermal warping. The diameter of the total heatbed is 215mm, and the diameter of the active
  3 KB (483 words) - 11:08, 17 January 2018
• CoreXY
  | Cast aluminum MIC6 build plate to minimize warping. Z is controlled by moving XY gantry in Z direction, 4 independent motors a
  9 KB (1,361 words) - 17:11, 31 August 2020
• FuseBox
  *Squared back edges of z rod mounts for less warping/easier alignment
  7 KB (1,037 words) - 19:00, 5 April 2016
• Prusa i3/bg
  ...se of materials such as [[ABS]] and nylon which can experience significant warping if printing on a cold platform.
  10 KB (1,599 words) - 18:52, 16 July 2015
• PLA/PHA
  -PLA/PHA filament is less prone to warping during printing.
  633 bytes (97 words) - 14:12, 15 April 2016
• BrundleFab
  File:BrundleFab-lhv2-warping.jpg|Caramel soot accumulation on light chamber seam. ...ter burn-in - burned off sign material in locations exceeding 300C. Slight warping noticed around light chamber.
  27 KB (4,217 words) - 23:31, 1 September 2015
• Heated Bed/es
  You should let the Heated Bed and piece cool down to avoid warping.
  30 KB (5,032 words) - 08:30, 20 October 2015
• The incomplete reprap beginner's guide/fr
  |Warping
  115 KB (18,778 words) - 06:34, 6 October 2018
• The incomplete RepRap Prusa Mendel beginner's guide/fr
  |Warping
  115 KB (18,793 words) - 06:31, 6 October 2018
• Prusa i3/pt
  ...se of materials such as [[ABS]] and nylon which can experience significant warping if printing on a cold platform.
  11 KB (1,764 words) - 17:46, 30 September 2018
• Prusa i3/it
  ...se of materials such as [[ABS]] and nylon which can experience significant warping if printing on a cold platform.
  9 KB (1,408 words) - 11:35, 12 March 2016
• Mechanical Rigidity
  ...warped. Depending on the degree of warping, 4-point levelling allows the warping to be corrected, whereas if a triple-mounted printbed is warped it will nee
  14 KB (2,271 words) - 08:53, 20 January 2020
• MOST Reprap Printing Lessons
  * Keep the print area draft free. Drafts exacerbate warping and increase power consumption to maintain heated bed and hot end temperatu * Let the heated bed get to temperature before printing to minimize warping.
  6 KB (943 words) - 00:07, 17 May 2018
• Glossary/ja
  ...を指します。このような収縮は、RP部品において 反り (warping) や 内部ストレス の原因となります。これによる最も有
  28 KB (707 words) - 20:10, 21 June 2018
• Batten i3
  ...laser cutter I wanted to construct my frame from ordinary lumber. To keep warping to a minimum you should get quarter sawn lumber, engineered lumber or use s
  12 KB (2,025 words) - 16:26, 2 April 2021
• Triffid Hunter's Calibration Guide/fr
  # not exhibit 'hourglass' warping, and
  19 KB (3,147 words) - 06:33, 6 October 2018
• Heated Bed/ua
  ...occur throughout a printed part evenly, the result is a warped part. This warping is commonly seen as corners being lifted off of the build platform. Printin You should let the Heated Bed and piece cool down to avoid warping.
  31 KB (5,063 words) - 11:02, 2 November 2018
• Printing quality/ru
  ...ded part from cooling (and shrinking) too quickly. Such shrinking leads to warping internal stresses in RP parts. The most common result is corners of parts l
  1 KB (140 words) - 09:43, 6 November 2018
• Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing
  ...rlayer adhesion between the printed metal part and the print substrate. No warping of the substrate was observed during printing. It was determined that boron ...-printing-garage/ DIY Metal 3D Printing Coming to Your Garage Soon With No Warping & Easy Removal From Print Bed] - 3DPrint.com
  4 KB (569 words) - 11:21, 5 November 2018
• Open-source mobile water quality testing platform
  In case you experience extensive warping (layers coming apart from each other), you can try to print the case in two
  9 KB (1,205 words) - 10:50, 7 February 2019
• Erasmus
  ...laser cutter I wanted to construct my frame from ordinary lumber. To keep warping to a minimum you should get quarter sawn lumber, engineered lumber or use s
  5 KB (857 words) - 18:05, 13 March 2021
• Resources/it
  ...ated bed, parts have a tendency to cool down too quickly. This results in warping of corners (as the plastic shrinks while cooling) or the part physically de
  26 KB (4,261 words) - 14:24, 2 December 2022