User:Alexdobrianski
Revision as of 21:24, 9 December 2013 by Alexdobrianski (talk | contribs)
Alex Dobrianski. [email protected]
Proposed development- Printing with easy to mix Titanium alloys on Mendel printer
Samples metal parts from paste:
Extruder: can be used ParametricSyringeExtruder - but it will be beneficiary to design extruder printable with the same alloys.
Solidification: vacuum chamber, heat - from 100C - 820C step +5C/min, 25min under 820C, then holding vacuum, drop temperature to 350C, and release vacuum valve.