File:Milling pcbs 01 detail.jpg

From RepRap
Jump to: navigation, search
Original file ‎(1,253 × 940 pixels, file size: 298 KB, MIME type: image/jpeg)

Copper plate milling with gEDA/pcb -> gerber and excellon files -> pcb2gcode -> EMC2/Axis. 60 degrees v-bit with 0.2 mm flat end. Milling at 0.1 mm (still to deep!). epoxy-glass board.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current07:23, 11 December 2010Thumbnail for version as of 07:23, 11 December 20101,253 × 940 (298 KB)Lanthan (talk | contribs)Copper plate milling with gEDA/pcb -> gerber and excellon files -> pcb2gcode -> EMC2/Axis. 60 degrees v-bit with 0.2 mm flat end. Milling at 0.1 mm (still to deep. epoxy-glass board.
  • You cannot overwrite this file.

The following 2 pages link to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
OrientationNormal
Horizontal resolution240 dpi
Vertical resolution240 dpi
Software usedAdobe Photoshop CS4 Macintosh
File change date and time12:17, 6 December 2010
Color spacesRGB
Width1,253 px
Height940 px
Pixel compositionRGB
Number of components3
Image width1,253 px
Image height940 px
Bits per component
  1. 8
  2. 8
  3. 8
Date and time of digitizing13:15, 6 December 2010
Date metadata was last modified13:17, 6 December 2010
Unique ID of original documentxmp.did:0380117407206811871F967C0205DDBF
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Milling_pcbs_01_detail.jpg&oldid=24895"