File:Reprappro-multi-materials-extruder-drive-block-mounting.jpg

From RepRap
Jump to: navigation, search
Original file ‎(864 × 1,084 pixels, file size: 373 KB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current09:10, 30 January 2013Thumbnail for version as of 09:10, 30 January 2013864 × 1,084 (373 KB)RhysJones (talk | contribs)
13:26, 16 January 2013Thumbnail for version as of 13:26, 16 January 2013570 × 655 (129 KB)Adrianbowyer (talk | contribs)
  • You cannot overwrite this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerPanasonic
Camera modelDMC-TZ7
Exposure time1/30 sec (0.033333333333333)
F Numberf/3.3
ISO speed rating160
Date and time of data generation10:10, 30 January 2013
Lens focal length4.1 mm
OrientationNormal
Horizontal resolution72 dpi
Vertical resolution72 dpi
Software usedGIMP 2.6.12
File change date and time13:08, 30 January 2013
Y and C positioningCo-sited
Exposure ProgramNormal program
Exif version2.21
Date and time of digitizing10:10, 30 January 2013
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode4
APEX exposure bias0
Maximum land aperture3.44 APEX (f/3.29)
Metering modePattern
Light sourceUnknown
FlashFlash did not fire, compulsory flash suppression
Supported Flashpix version0,100
Color spacesRGB
Sensing methodOne-chip color area sensor
File sourceDigital still camera
Scene typeA directly photographed image
Custom image processingNormal process
Exposure modeAuto exposure
White balanceAuto white balance
Digital zoom ratio0
Focal length in 35 mm film25 mm
Scene capture typeStandard
Scene controlLow gain up
ContrastNormal
SaturationNormal
SharpnessNormal
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Reprappro-multi-materials-extruder-drive-block-mounting.jpg&oldid=80307"