Vision 3d printer
After some time studying the RepRap came into my head the idea of doing something about the quality of the final print (0.4 mm is not something that makes it very attractive for many people (my idea is atinguir 0.1 mm)) so I developed my knowledge in atravez cnc parts that make it more accurate and safer. I have been inspired by the electronic RAMPS project due to its simplicity in providing everything you need to operate in only one place in an orderly manner and avoid so many threads scattered throughout the machine and contain the drivers pololus that is superior compared to third generation of electronics. In relation to mechanical'm inspired by professional printing machines, the entire project is being built in aluminum which makes it a worthwhile project higher.
settings of the machine brings features like the desktop of 350 x 350 x 350, with a resolution of 0.1 mm, We are working to the final size of the machine is small enough to fit on a desktop.
the Vision 3D Printer
- Is it possible to buy this vision 3D printer somewhere? If so, please add a link to that location here.
- (and then add that link to the RepRap Buyers' Guide. Thank you. --DavidCary 14:53, 25 August 2013 (UTC) )