I'm wondering if anyone else has any input on such an attempt. Would/could the mixing stage happen on the table? -if so what kind of speed would be required. or Perhaps a UV activated epoxy would be adaptable? I am envisioning a jbweld type material for gear printing. https://reprap.org/forum/read.php?1,106663,106663#msg-106663 Tue, 13 Oct 2026 05:58:36 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,106663,106684#msg-106684 https://reprap.org/forum/read.php?1,106663,106684#msg-106684
look at fab@home project. they have experience with liquid print heads. i think reprap has paste extruders and concrete extruders. there is some research as patents are expiring into ink-jet and piezoelectric.

There is also a danger with mixing using single head and cure times solidifying inside the nozzle head. you would need a filler material to allow the 2 resins to keep shape and properly mix. such as paper clay and a 2 part epoxy from alumilite corp.]]> jamesdanielv General Fri, 18 Nov 2011 06:38:14 -0500 https://reprap.org/forum/read.php?1,106663,106663#msg-106663 https://reprap.org/forum/read.php?1,106663,106663#msg-106663
Would/could the mixing stage happen on the table?
-if so what kind of speed would be required.

or

Perhaps a UV activated epoxy would be adaptable?

I am envisioning a jbweld type material for gear printing.]]> jkomp316 General Fri, 18 Nov 2011 01:53:13 -0500