Hi all can someone guild me true changing my extruder direction in the firmware. Cos i'm new to all dis and i'm an idiot. Oh the firmware is marlin.. thanks... https://reprap.org/forum/read.php?1,119665,119665#msg-119665 Mon, 16 Mar 2026 10:39:29 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,119665,119695#msg-119695 https://reprap.org/forum/read.php?1,119665,119695#msg-119695 Will try do it wire way as i under stand that way.]]> dave86 General Sun, 19 Feb 2012 13:17:23 -0500 https://reprap.org/forum/read.php?1,119665,119679#msg-119679 https://reprap.org/forum/read.php?1,119665,119679#msg-119679 github.com] get to know it and configure it yourself.

If you want to switch the extruder direction outside of the firmware, just turn off and disconnect power to the electronics, then flip the extruder motor connector.]]> Nudel General Sun, 19 Feb 2012 11:14:54 -0500 https://reprap.org/forum/read.php?1,119665,119670#msg-119670 https://reprap.org/forum/read.php?1,119665,119670#msg-119670 dave86 General Sun, 19 Feb 2012 09:35:11 -0500 https://reprap.org/forum/read.php?1,119665,119669#msg-119669 https://reprap.org/forum/read.php?1,119665,119669#msg-119669 Nudel General Sun, 19 Feb 2012 09:26:25 -0500 https://reprap.org/forum/read.php?1,119665,119665#msg-119665 https://reprap.org/forum/read.php?1,119665,119665#msg-119665 dis and i'm an idiot. Oh the firmware is marlin..
thanks...]]> dave86 General Sun, 19 Feb 2012 08:52:36 -0500