do you guys have this issue? i am constantly having to refeed my 1.75mm pla https://reprap.org/forum/read.php?1,120309,120309#msg-120309 Sat, 12 Sep 2026 09:58:13 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,120309,324788#msg-324788 https://reprap.org/forum/read.php?1,120309,324788#msg-324788 I recieved a new roll.
But...
See for yourself. [www.youtube.com]]]> RBA2000 General Fri, 14 Mar 2014 10:10:53 -0400 https://reprap.org/forum/read.php?1,120309,315631#msg-315631 https://reprap.org/forum/read.php?1,120309,315631#msg-315631 ekaggrat General Mon, 24 Feb 2014 20:30:08 -0500 https://reprap.org/forum/read.php?1,120309,315624#msg-315624 https://reprap.org/forum/read.php?1,120309,315624#msg-315624 RBA2000 General Mon, 24 Feb 2014 20:06:28 -0500 https://reprap.org/forum/read.php?1,120309,315619#msg-315619 https://reprap.org/forum/read.php?1,120309,315619#msg-315619
not worth saving 10$ to spend 80 more for a new hot end, or to constantly stop prints. some of these suppliers think they are clever by adding this kind of junk!]]> jamesdanielv General Mon, 24 Feb 2014 19:54:06 -0500 https://reprap.org/forum/read.php?1,120309,315582#msg-315582 https://reprap.org/forum/read.php?1,120309,315582#msg-315582 NewPerfection General Mon, 24 Feb 2014 18:07:59 -0500 https://reprap.org/forum/read.php?1,120309,315540#msg-315540 https://reprap.org/forum/read.php?1,120309,315540#msg-315540 It's just weird, because it's my first roll. Some days it's going nice. Make one print after an other but some days. It just breaks on the roll or in the extruder. An other day just in the midle of the tube between the extruder and the nozzle.
I can not compare with an other roll so..
Or am I doing something completly wrong here.

I have a DIV mega prusa with a 0,7 mm nozlle and print (when I can) with 3mm PLA.
Room temp is around 21 degree.
PLA is on a roll and hangs free on a round tube.

Any one an idea.
(forgive my bad English. It's not my native language)]]> RBA2000 General Mon, 24 Feb 2014 16:36:15 -0500 https://reprap.org/forum/read.php?1,120309,120358#msg-120358 https://reprap.org/forum/read.php?1,120309,120358#msg-120358 Andrew Diehl General Wed, 22 Feb 2012 19:16:29 -0500 https://reprap.org/forum/read.php?1,120309,120344#msg-120344 https://reprap.org/forum/read.php?1,120309,120344#msg-120344 the white abs i got from them works good.]]> glrra19 General Wed, 22 Feb 2012 17:39:54 -0500 https://reprap.org/forum/read.php?1,120309,120319#msg-120319 https://reprap.org/forum/read.php?1,120309,120319#msg-120319
What make of PLA are you using?
Are you using a bowden tube?
Is the PLA on a reel and are you using a spool holder or is it being fed some other way.

I have had some odd things happen to me with PLA, shatter on a reel, break during feed.

But I have never had any breaking issues with good PLA, only the low-quality stuff.]]> richrap General Wed, 22 Feb 2012 15:08:04 -0500 https://reprap.org/forum/read.php?1,120309,120318#msg-120318 https://reprap.org/forum/read.php?1,120309,120318#msg-120318 NelsonRap General Wed, 22 Feb 2012 15:07:47 -0500 https://reprap.org/forum/read.php?1,120309,120309#msg-120309 https://reprap.org/forum/read.php?1,120309,120309#msg-120309 i am constantly having to refeed my 1.75mm pla]]> glrra19 General Wed, 22 Feb 2012 14:29:58 -0500