Well, it's past April 30th so the Latest Stable Build has been finalized : Frame- Prusa Mendel v1 Electronics- Ramps Firmware- Marlin Extruder Hot end- J Head Extruder Cold end- Wades Geared Extruder Interface Software- Printrun Slicing Software- Slic3r If you haven't seen the other topic in the dev forum (the one where we talked a lot about semantics) the LSB is meant to be a mile marker for the wiki, updated yearly, so that we can make a more clear and uniform set of build instructions. These are not cutting-edge parts, mostly, but instead parts that are widely adopted, so that there are many users that can contribute to the wiki. Many newbies are stymied by the outdated info on the wiki. Most of the useful info is spread around in these forums and on personal blogs. It's no wonder people are constantly asking the same questions regarding their new builds again and again in the forums So, If you built or use any of these or similar components, please look over these wiki pages once and a while and add what you can. If you've never edited a wiki before, don't be afraid of stepping on someone's toes. You're free to edit any page that isn't locked. And if you need help formatting, look here. If you think this set of parts sucks, don't worry! There will be a new LSB for 2013! We'll probably start gathering input around October (got started a bit late this year). So far the only requirements are that the part has an existing page on the wiki before finilazation, everything is open source, and software be cross-platform. Components should also be old enough to be widely adopted so there's plenty of people out there to edit the wiki, but not so old that you can't keep up with current development. https://reprap.org/forum/read.php?1,131005,131005#msg-131005 Tue, 21 Jul 2026 12:28:58 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,131005,131239#msg-131239 https://reprap.org/forum/read.php?1,131005,131239#msg-131239 -------------------------------------------------------
> Nice, And well done. You can't really go wrong
> using that list as a starting point, hopefully in
> the months to come this will be seen by many as a
> good reference for new reprappers and an ongoing
> guide for the future. I believe it can only do
> good for RepRap to have some sort of sensible
> guidance on a proven set of parts and tool-chain
> for new builders. It's all too easy for hardened
> developers to assume this is already common
> knowledge.

I can't agree with you more richrap. Most of the people I help get into RepRep, their first 30 questions are pretty much related to this. "Where do I start?" is the biggest thing about getting over that intimidation factor of so many options and choices to be made.

Good work buback. I give you an internet high five.

bdc
~Stay Calm Out There]]> bdcannon General Thu, 03 May 2012 15:03:00 -0400 https://reprap.org/forum/read.php?1,131005,131228#msg-131228 https://reprap.org/forum/read.php?1,131005,131228#msg-131228 richrap General Thu, 03 May 2012 14:02:13 -0400 https://reprap.org/forum/read.php?1,131005,131131#msg-131131 https://reprap.org/forum/read.php?1,131005,131131#msg-131131 Mkouri General Wed, 02 May 2012 21:45:37 -0400 https://reprap.org/forum/read.php?1,131005,131011#msg-131011 https://reprap.org/forum/read.php?1,131005,131011#msg-131011 johnbiehler General Wed, 02 May 2012 12:26:42 -0400 https://reprap.org/forum/read.php?1,131005,131005#msg-131005 https://reprap.org/forum/read.php?1,131005,131005#msg-131005 Latest Stable Build has been finalized :

Frame- Prusa Mendel v1
Electronics- Ramps
Firmware- Marlin
Extruder Hot end- J Head
Extruder Cold end- Wades Geared Extruder
Interface Software- Printrun
Slicing Software- Slic3r

If you haven't seen the other topic in the dev forum (the one where we talked a lot about semantics) the LSB is meant to be a mile marker for the wiki, updated yearly, so that we can make a more clear and uniform set of build instructions. These are not cutting-edge parts, mostly, but instead parts that are widely adopted, so that there are many users that can contribute to the wiki.

Many newbies are stymied by the outdated info on the wiki. Most of the useful info is spread around in these forums and on personal blogs. It's no wonder people are constantly asking the same questions regarding their new builds again and again in the forums

So, If you built or use any of these or similar components, please look over these wiki pages once and a while and add what you can. If you've never edited a wiki before, don't be afraid of stepping on someone's toes. You're free to edit any page that isn't locked. And if you need help formatting, look here.

If you think this set of parts sucks, don't worry! There will be a new LSB for 2013! We'll probably start gathering input around October (got started a bit late this year). So far the only requirements are that the part has an existing page on the wiki before finilazation, everything is open source, and software be cross-platform. Components should also be old enough to be widely adopted so there's plenty of people out there to edit the wiki, but not so old that you can't keep up with current development.]]> Buback General Wed, 02 May 2012 11:36:53 -0400