I'm terribly inexperienced when it comes to multimeters and voltages. Until RepRap my experience has been in nice simple computer components. That being said, I am not terribly clear how to proper connect and measure the current output from Motor Controllers to the Stepper Motors. Does anyone have a link to a general meter use guide or even better, a visual description of measuring RepRap motors/current? Written steps would be extremely helpful too. I attempted attaching the two meter cables to a pair of stepper motors to what I assumed to be positive and negative. I found no reading so I stopped and asked teh internets. Any and all help is much appreciated as always. https://reprap.org/forum/read.php?1,160113,160113#msg-160113 Wed, 13 May 2026 03:15:16 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,160113,160130#msg-160130 https://reprap.org/forum/read.php?1,160113,160130#msg-160130 Stepper Motors .]]> MattMoses General Thu, 11 Oct 2012 17:15:21 -0400 https://reprap.org/forum/read.php?1,160113,160126#msg-160126 https://reprap.org/forum/read.php?1,160113,160126#msg-160126 www.schmalzhaus.com]]]> jamesdanielv General Thu, 11 Oct 2012 17:06:05 -0400 https://reprap.org/forum/read.php?1,160113,160113#msg-160113 https://reprap.org/forum/read.php?1,160113,160113#msg-160113
I attempted attaching the two meter cables to a pair of stepper motors to what I assumed to be positive and negative. I found no reading so I stopped and asked teh internets. Any and all help is much appreciated as always.]]> hibijibi General Thu, 11 Oct 2012 16:21:37 -0400