ABS quality (1,75mm) Hi! I recently switched to a 1.75mm nozzle (from GGRF), and I'm about to buy ABS. My first ABS (3mm) was from Ultimachine. I then bough ABS from Paoparts. Ultimachine ABS was good, but a little bit yellow. The Paoparts ABS was pure white (very nice), but had more shrinkage, and was more brittle (cohesion between layers was not as good as with Ultimachine one). What ABS do you use? I mainly print very little parts (0.1mm layers), like small gears, or figurines, and also need some strongs parts. Any advice for a good supplier is welcome. https://reprap.org/forum/read.php?1,175338,175338#msg-175338 Sun, 16 Aug 2026 00:49:15 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,175338,176848#msg-176848 Re: ABS quality (1,75mm) https://reprap.org/forum/read.php?1,175338,176848#msg-176848
[cgi.ebay.fr]

Is it really smart?]]> fma General Tue, 15 Jan 2013 02:13:13 -0500 https://reprap.org/forum/read.php?1,175338,176108#msg-176108 Re: ABS quality (1,75mm) https://reprap.org/forum/read.php?1,175338,176108#msg-176108 fma General Fri, 11 Jan 2013 08:14:35 -0500 https://reprap.org/forum/read.php?1,175338,176060#msg-176060 Re: ABS quality (1,75mm) https://reprap.org/forum/read.php?1,175338,176060#msg-176060 We sent several samples to our HK customer weeks ago, he tested and said the printing goes very well.We have ABS filament,3.00mm and 1.75mm.Many colors optional.We are using CHIMEI ABS as raw material.]]> ecoreprap General Fri, 11 Jan 2013 03:49:44 -0500 https://reprap.org/forum/read.php?1,175338,175338#msg-175338 ABS quality (1,75mm) https://reprap.org/forum/read.php?1,175338,175338#msg-175338
I recently switched to a 1.75mm nozzle (from GGRF), and I'm about to buy ABS.

My first ABS (3mm) was from Ultimachine. I then bough ABS from Paoparts. Ultimachine ABS was good, but a little bit yellow. The Paoparts ABS was pure white (very nice), but had more shrinkage, and was more brittle (cohesion between layers was not as good as with Ultimachine one).

What ABS do you use? I mainly print very little parts (0.1mm layers), like small gears, or figurines, and also need some strongs parts.

Any advice for a good supplier is welcome.]]> fma General Mon, 07 Jan 2013 04:27:57 -0500