Extruder Drive Design Ideas for Inexpensive Oval Welding Rod It's so cheap. :) mod_embed_images_loadimage('69848d3e5d0291f01f26c12115ad5c9a', '/forum/thumbcache/aee/7c5/3c6/204/717/625/4c7/afa/d09/9fd/42_800x400.jpg', 'http://forums.reprap.org/file.php?1,file=22959,filename=ScreenHunter_304_Dec._14_05.08.jpg', 'https://reprap.org/forum/addon.php?1,module=embed_images,check_scaling=1,url=http%3A%2F%2Fforums.reprap.org%2Ffile.php%3F1%2Cfile%3D22959%2Cfilename%3DScreenHunter_304_Dec._14_05.08.jpg', '', 279759, 800, 400, 'Loading image ...', false); What hot end design ideas do you have to process an oval profile? I read complaints of feeding issues with slightly out of round filament. The hob has a round profile, and this filament has an oval profile. I'm wondering if there will be significant feeding challenges with an oval profile in a typical hobbed bolt drive? The second potential issues, because the oval profile doesn't plug-seal the bore of the barrel, would the melted plastic tend to back up and out the top of the extruder barrel? My first thought is that once that the rod is inside the barrel, and is pressed firmly into the melt zone of the hot end, the profile of the filament doesn't matter anymore. Looking at this gear on gear filament driver that takes advantage of the inexpensive plastic welding rod, I think that the oval profile is a challenge to feed. mod_embed_images_loadimage('dad44da5b968a6954ecb6aa231341637', '/forum/thumbcache/2a2/894/dac/bd9/a4f/8d8/294/d93/242/10c/ff_800x400.png', 'http://forums.reprap.org/file.php?1,file=22955,filename=ScreenHunter_303_Dec._14_04.46.jpg', 'https://reprap.org/forum/addon.php?1,module=embed_images,check_scaling=1,url=http%3A%2F%2Fforums.reprap.org%2Ffile.php%3F1%2Cfile%3D22955%2Cfilename%3DScreenHunter_303_Dec._14_04.46.jpg', '', 279759, 800, 400, 'Loading image ...', false); Improved 3D printer extruder allows more plastic options [www.kickstarter.com] A third potential problem of an oval profile, would twisting ahead of feeding the filament into the barrel of the extruder cause feeding problems? $8 to $16 / lbs 1/8" HDPE Oval Welding Rod 1/8" LDPE Oval Welding Rod 1/8" White ABS Welding Rod 1/8" Natural Polypropylene Oval Welding Rod 5/32" Marine Grade HDPE Black Welding Rod [www.usplastic.com] https://reprap.org/forum/read.php?1,279759,279759#msg-279759 Tue, 11 Aug 2026 04:22:47 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,279759,284714#msg-284714 Re: Extruder Drive Design Ideas for Inexpensive Oval Welding Rod https://reprap.org/forum/read.php?1,279759,284714#msg-284714
Quote
A2
Please share your experience of how to best go about printing HDPE/PP.

Some of Forrest's experiments with HDPE:
Revisiting HDPE
No-sweat HDPE printing

Some of nophead's experiments with HDPE:
Scaling new heights]]> MattMoses General Wed, 25 Dec 2013 21:10:56 -0500 https://reprap.org/forum/read.php?1,279759,284704#msg-284704 Re: Extruder Drive Design Ideas for Inexpensive Oval Welding Rod https://reprap.org/forum/read.php?1,279759,284704#msg-284704 SamS General Wed, 25 Dec 2013 18:59:55 -0500 https://reprap.org/forum/read.php?1,279759,283952#msg-283952 Re: Design Ideas for Cheap 1/8" HDPE Oval Welding Rod https://reprap.org/forum/read.php?1,279759,283952#msg-283952
Quote
Forrest Higgs
Printing successfully with them [HDPE, PP], however, requires quite a bit of experience because of the high heat shrinkage rate of both polymers.
It is quite difficult to make larger objects with these plastics.
It can be done, mind, but it is quite an art. I know from first hand experience.

Please share your experience of how to best go about printing HDPE/PP.
If you have any photos to share it would be helpful.
Tks!]]> A2 General Mon, 23 Dec 2013 16:39:53 -0500 https://reprap.org/forum/read.php?1,279759,280128#msg-280128 Re: Design Ideas for Cheap 1/8" HDPE Oval Welding Rod https://reprap.org/forum/read.php?1,279759,280128#msg-280128 A tractor feed might work. Is there an example of a tractor feed extruder?
Whatever you get to work with an oval filament, I believe will work for a round filament.

I used to teach hand welding PP/PE, and I can attest that it's challenging for some people to master (it's an art).
But after watching Luminar Products video of a 3d printer laying down an extrudate, I'm encouraged by what I see.
It looks like it prints well.

The Luminar Super Extruder EX001 might be pricey for some budgets,
but I think it's valuated fairly, as there is lot of machining to it.]]> A2 General Sun, 15 Dec 2013 09:46:37 -0500 https://reprap.org/forum/read.php?1,279759,280109#msg-280109 Re: Design Ideas for Cheap 1/8" HDPE Oval Welding Rod https://reprap.org/forum/read.php?1,279759,280109#msg-280109 Forrest Higgs General Sun, 15 Dec 2013 08:48:20 -0500 https://reprap.org/forum/read.php?1,279759,280059#msg-280059 Re: Design Ideas for Cheap 1/8" HDPE Oval Welding Rod https://reprap.org/forum/read.php?1,279759,280059#msg-280059 aduy General Sun, 15 Dec 2013 05:39:16 -0500 https://reprap.org/forum/read.php?1,279759,279759#msg-279759 Extruder Drive Design Ideas for Inexpensive Oval Welding Rod https://reprap.org/forum/read.php?1,279759,279759#msg-279759


What hot end design ideas do you have to process an oval profile?

I read complaints of feeding issues with slightly out of round filament.
The hob has a round profile, and this filament has an oval profile.
I'm wondering if there will be significant feeding challenges
with an oval profile in a typical hobbed bolt drive?

The second potential issues, because the oval profile doesn't plug-seal the bore of the barrel,
would the melted plastic tend to back up and out the top of the extruder barrel?
My first thought is that once that the rod is inside the barrel, and is pressed firmly
into the melt zone of the hot end, the profile of the filament doesn't matter anymore.

Looking at this gear on gear filament driver that takes advantage of the inexpensive
plastic welding rod, I think that the oval profile is a challenge to feed.



Improved 3D printer extruder allows more plastic options
[www.kickstarter.com]

A third potential problem of an oval profile, would twisting ahead of
feeding the filament into the barrel of the extruder cause feeding problems?

$8 to $16 / lbs
1/8" HDPE Oval Welding Rod
1/8" LDPE Oval Welding Rod
1/8" White ABS Welding Rod
1/8" Natural Polypropylene Oval Welding Rod
5/32" Marine Grade HDPE Black Welding Rod
[www.usplastic.com]
]]> A2 General Sat, 14 Dec 2013 05:11:39 -0500