looking for a 0.7mm to 1mm nozzle closest i have found is 0.6mm. i use the type with 6mm male thread. also im in ohio so i dont want to pay shipping from outside us could i just drill out a smaller nozzle? i have read you want a longer hole the bigger hole diameter i think i read 1.5 times the hole diameter. i did drill one out of a 0.5mm nozzle it seemed to work ok . if i have to make my own how long should i make the hole? thanks joe https://reprap.org/forum/read.php?1,307858,307858#msg-307858 Mon, 12 Oct 2026 14:52:29 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,307858,308270#msg-308270 https://reprap.org/forum/read.php?1,307858,308270#msg-308270 Anonymous User General Sat, 08 Feb 2014 17:47:11 -0500 https://reprap.org/forum/read.php?1,307858,308237#msg-308237 https://reprap.org/forum/read.php?1,307858,308237#msg-308237 jm44807 General Sat, 08 Feb 2014 16:21:46 -0500 https://reprap.org/forum/read.php?1,307858,307873#msg-307873 https://reprap.org/forum/read.php?1,307858,307873#msg-307873 Anonymous User General Fri, 07 Feb 2014 20:47:01 -0500 https://reprap.org/forum/read.php?1,307858,307866#msg-307866 https://reprap.org/forum/read.php?1,307858,307866#msg-307866 reprap.org]]]> jamesdanielv General Fri, 07 Feb 2014 20:22:31 -0500 https://reprap.org/forum/read.php?1,307858,307858#msg-307858 https://reprap.org/forum/read.php?1,307858,307858#msg-307858 also im in ohio so i dont want to pay shipping from outside us

could i just drill out a smaller nozzle? i have read you want a longer hole the bigger hole diameter i think i read 1.5 times the hole diameter.

i did drill one out of a 0.5mm nozzle it seemed to work ok .

if i have to make my own how long should i make the hole?

thanks
joe]]> jm44807 General Fri, 07 Feb 2014 19:52:34 -0500