AWorldnet A600 Not Working Bought the A600 printer from AWorldNet via an online retailer called Havit a couple of weeks ago. Assembly was relatively straightforward with only minor tweaks required to make things fit together. X,Y and Z axes can be controlled manually using the Repetier host software provided with the printer. Heated bed and extruder seem to be operating correctly. The problem is that when trying to print a model, the head seems to move to a random starting point every time, and starts extruding in the air above the bed. The Z axis starting point appears to be different every time. Does anyone else have this problem? If so can you offer any advice on how to fix the problem please? Many thanks, Nigel https://reprap.org/forum/read.php?1,452202,452202#msg-452202 Sat, 13 Jun 2026 18:07:40 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,452202,572146#msg-572146 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,572146#msg-572146
Quote
magnetos
thx for the input .

for some reason the step/mm are complete diffirent from original setting that you have on repitier firmware.
i try with repitier firmware and the printer axis stop at middle of the axis at 200mm but if i use my setting goes to the other end the axis .. lets say the real 200mm
here my setting for marlin 1.0.2.

define DEFAULT_AXIS_STEPS_PER_UNIT {204.78,204.78,684,760*1.1} // default steps per unit for Ultimaker
#define DEFAULT_MAX_FEEDRATE {200, 200, 4, 25} // (mm/sec)
#define DEFAULT_MAX_ACCELERATION {1000,1000,100,1000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.

#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts

not sure if its 100% right step/mm , will need to adjust as soon i start to print my first cube 10x10x10 from there i will. i try the calculator (step/mm) that came with repitier-host and i try the i-prusa calculator but that both give me wrong steps/mm (80 to 100) ??? what am i doing wrong here ???]]> magnetos General Sun, 18 Oct 2015 10:44:42 -0400 https://reprap.org/forum/read.php?1,452202,572142#msg-572142 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,572142#msg-572142 magnetos General Sun, 18 Oct 2015 10:37:16 -0400 https://reprap.org/forum/read.php?1,452202,571637#msg-571637 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,571637#msg-571637 magnetos General Fri, 16 Oct 2015 19:03:04 -0400 https://reprap.org/forum/read.php?1,452202,569175#msg-569175 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,569175#msg-569175
Quote
transmech
Here it is All done with no auto bed leveling. Only works on Ramps with Arduino mega. Sorry guys with the Melzi board no luv for now.
[drive.google.com]
hi, i use your mod firmware. but i having some issue like my z home not responding and x and y stop at halfway when i try to push to 200mm ???? . the z axis goes up and not down, any idea what could be ??? thank you for any input.]]> magnetos General Sun, 11 Oct 2015 11:13:00 -0400 https://reprap.org/forum/read.php?1,452202,482422#msg-482422 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,482422#msg-482422 transmech General Wed, 11 Mar 2015 14:39:20 -0400 https://reprap.org/forum/read.php?1,452202,482268#msg-482268 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,482268#msg-482268 i have to put it on again, now when my extruder motor doesn't skip steps any more]]> darac_komarac General Wed, 11 Mar 2015 09:09:49 -0400 https://reprap.org/forum/read.php?1,452202,482263#msg-482263 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,482263#msg-482263 darac_komarac General Wed, 11 Mar 2015 09:04:11 -0400 https://reprap.org/forum/read.php?1,452202,482077#msg-482077 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,482077#msg-482077 transmech General Tue, 10 Mar 2015 19:26:26 -0400 https://reprap.org/forum/read.php?1,452202,481797#msg-481797 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,481797#msg-481797 i'll try to upload and start tweeking..... as soon as i solve this problem.... my exruder breaked....
[drive.google.com]]]> darac_komarac General Tue, 10 Mar 2015 08:45:07 -0400 https://reprap.org/forum/read.php?1,452202,480331#msg-480331 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,480331#msg-480331 www.thingiverse.com]]]> transmech General Fri, 06 Mar 2015 23:09:26 -0500 https://reprap.org/forum/read.php?1,452202,480330#msg-480330 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,480330#msg-480330 [drive.google.com]]]> transmech General Fri, 06 Mar 2015 22:51:30 -0500 https://reprap.org/forum/read.php?1,452202,479988#msg-479988 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,479988#msg-479988
looling forward to it]]> darac_komarac General Fri, 06 Mar 2015 07:47:11 -0500 https://reprap.org/forum/read.php?1,452202,479458#msg-479458 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,479458#msg-479458
Quote
transmech
Will do later this week. Also do you have an lcd? Also what about the auto level hardware? If not I can send you the link to the thingiverse.com file for it. You wouldn't believe the difference it makes.

I'll take the link to the auto leveling thingiverse files.]]> Dr. Bogger General Thu, 05 Mar 2015 09:56:54 -0500 https://reprap.org/forum/read.php?1,452202,479455#msg-479455 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,479455#msg-479455 transmech General Thu, 05 Mar 2015 09:51:46 -0500 https://reprap.org/forum/read.php?1,452202,479454#msg-479454 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,479454#msg-479454 transmech General Thu, 05 Mar 2015 09:51:46 -0500 https://reprap.org/forum/read.php?1,452202,479453#msg-479453 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,479453#msg-479453 transmech General Thu, 05 Mar 2015 09:51:46 -0500 https://reprap.org/forum/read.php?1,452202,479452#msg-479452 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,479452#msg-479452 transmech General Thu, 05 Mar 2015 09:51:46 -0500 https://reprap.org/forum/read.php?1,452202,479330#msg-479330 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,479330#msg-479330 darac_komarac General Thu, 05 Mar 2015 04:49:32 -0500 https://reprap.org/forum/read.php?1,452202,478986#msg-478986 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,478986#msg-478986 transmech General Wed, 04 Mar 2015 11:43:12 -0500 https://reprap.org/forum/read.php?1,452202,478985#msg-478985 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,478985#msg-478985 transmech General Wed, 04 Mar 2015 11:37:54 -0500 https://reprap.org/forum/read.php?1,452202,478876#msg-478876 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,478876#msg-478876 i understand the frustration, had the same problem with my extruder. I managed to break the threads in my alu block when i was replacing the hot end. fortunately my friend sugested to use teflon tape and now everything is running where it should. :)
i have the spare ramps and i wolud be interested in firmware once you get it running if it is not too much trouble.

cheers]]> darac_komarac General Wed, 04 Mar 2015 08:02:42 -0500 https://reprap.org/forum/read.php?1,452202,475349#msg-475349 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,475349#msg-475349 transmech General Tue, 24 Feb 2015 17:34:15 -0500 https://reprap.org/forum/read.php?1,452202,475082#msg-475082 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,475082#msg-475082 On mine the bearings are so loose that I can wobble the extruder around with my hands.]]> Dr. Bogger General Tue, 24 Feb 2015 09:44:45 -0500 https://reprap.org/forum/read.php?1,452202,475010#msg-475010 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,475010#msg-475010
Having spent considerable time on this over the weekend, it seems the problem as Jaguarking suggested is in the settings.]]> stankura General Tue, 24 Feb 2015 06:46:22 -0500 https://reprap.org/forum/read.php?1,452202,474343#msg-474343 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,474343#msg-474343 I also modified a X Belt Clamp I found on thingiverse. I made it stronger by adding Zip Tie Support.

Belt Tensioners:
[www.thingiverse.com]

X-Belt Holder:
[www.thingiverse.com]

Enjoy!]]> Dr. Bogger General Sun, 22 Feb 2015 20:48:02 -0500 https://reprap.org/forum/read.php?1,452202,472210#msg-472210 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,472210#msg-472210 transmech General Tue, 17 Feb 2015 20:29:41 -0500 https://reprap.org/forum/read.php?1,452202,472208#msg-472208 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,472208#msg-472208 i will try that us soon my ebay seller tell's something , just got it , last week.
if not getting hot then is the plate bad got it.]]> magnetos General Tue, 17 Feb 2015 20:17:33 -0500 https://reprap.org/forum/read.php?1,452202,472179#msg-472179 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,472179#msg-472179 Dr. Bogger General Tue, 17 Feb 2015 17:42:24 -0500 https://reprap.org/forum/read.php?1,452202,472176#msg-472176 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,472176#msg-472176 well my problem is the hot bed it won't go higher that 40deg... but i can print object
ok here what i check so far.
volt in 12.22dc
test thermo sensor with hair drier to see that goes up the temp and its ok
check volt going to the bad and is 12vdc
check all connection to the board all ok4.94/
yes it take more that 30 minutes to reach 40 deg the base.
extruder works fine any temp a set, will go up qucick
about the main board , i so a video from youtube where i see a red led coming on when the printer is ready to print but on my board v2.0 not i only see a green led blick when the pc send data. don't know if they are different board outthere for the same A600.
i use the software the came with the 3d printer cura (old version) and repetier-host (old version)
any idea what could be beside ???
thank you.]]> magnetos General Tue, 17 Feb 2015 17:27:49 -0500 https://reprap.org/forum/read.php?1,452202,471885#msg-471885 Re: AWorldnet A600 Not Working https://reprap.org/forum/read.php?1,452202,471885#msg-471885
Quote
transmech
Here is my complete settings file for repetier host you can upload it. So far it works and I have gotten really good results. I will be constantly updating it till i find that balance between speed and quality I like.

Looks like your settings file has disappeared.]]> Dr. Bogger General Tue, 17 Feb 2015 08:19:12 -0500