Hi, simple question where do you buy connectors for your RAMPS and controller boards? Im having a super hard time finding more than the standard 3 pin servo connectors from these expensive RC shops/pololu distrubutors. But no coherent source offering 2,3 and 4 pin connector in a set or in the same store. Any reputable (china) source anyone? Cheers PS. is there a flat molex connector? I have 100 crimps that only fit on the 2510 type so it would be great to not only use the bigger ones for the motor connection where is more space but also for the smaller endstop switch type. https://reprap.org/forum/read.php?1,475117,475117#msg-475117 Wed, 22 Apr 2026 13:25:17 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,475117,475223#msg-475223 https://reprap.org/forum/read.php?1,475117,475223#msg-475223 this page.]]> cdru General Tue, 24 Feb 2015 14:03:51 -0500 https://reprap.org/forum/read.php?1,475117,475214#msg-475214 https://reprap.org/forum/read.php?1,475117,475214#msg-475214
[www.aliexpress.com]

This one is only 5.25 if you don't mind the waiting.]]> ggherbaz General Tue, 24 Feb 2015 13:47:33 -0500 https://reprap.org/forum/read.php?1,475117,475153#msg-475153 https://reprap.org/forum/read.php?1,475117,475153#msg-475153 connectors in many different pin configurations sold in small quantities, and they have pre-crimped wires in M/M, F/F and M/F configurations in various lengths and colors. Pololu is my go-to place for this. You could probably do better pricewise - especially on the connectors - if you go to someone like digikey, but you'll be buying in large quantities.]]> jbernardis General Tue, 24 Feb 2015 12:17:02 -0500 https://reprap.org/forum/read.php?1,475117,475117#msg-475117 https://reprap.org/forum/read.php?1,475117,475117#msg-475117
simple question where do you buy connectors for your RAMPS and controller boards? Im having a super hard time finding more than the standard 3 pin servo connectors from these expensive RC shops/pololu distrubutors. But no coherent source offering 2,3 and 4 pin connector in a set or in the same store. Any reputable (china) source anyone?

Cheers

PS. is there a flat molex connector? I have 100 crimps that only fit on the 2510 type so it would be great to not only use the bigger ones for the motor connection where is more space but also for the smaller endstop switch type.]]> sungod3k General Tue, 24 Feb 2015 10:59:56 -0500