I´ve set my infill at 26% with 10% overlap. The perimeter is 2mm thick. Today I´ve noticed the infill goes right up to the outer perimeter. #see attached Now I´m confused, what the 10% overlap actually means? Another question: On the pic you see the hotend. What material is the insulation? ( beside Kapton of course ) -Olaf https://reprap.org/forum/read.php?1,532869,532869#msg-532869 Sun, 09 Aug 2026 18:55:57 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,532869,532869#msg-532869 https://reprap.org/forum/read.php?1,532869,532869#msg-532869 Now I´m confused, what the 10% overlap actually means?

Another question: On the pic you see the hotend. What material is the insulation? ( beside Kapton of course )
-Olaf]]> o_lampe General Wed, 15 Jul 2015 10:44:44 -0400