I am building a custom 3d printer (cartesian style), using parts from an eventor bot. I cannot for the life of me find PTFE heat shrink that fits the leads of the 100k glass bead thermistor, I ordered. What has everyone else been using for this? The diameter of the leads is 0.19mm. Any ideas... or I just need to try to find a thermistor with thicker leads... Thanks ahead of time for any input! - Dave P. https://reprap.org/forum/read.php?1,592044,592044#msg-592044 Wed, 22 Jul 2026 01:29:03 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,592044,593136#msg-593136 https://reprap.org/forum/read.php?1,592044,593136#msg-593136 www.aliexpress.com]

You can follow the link to get some teflon sleeves, or you can just wrap the leads with kapton tape if you have some lying around.]]> chngyian General Sat, 05 Dec 2015 09:35:46 -0500 https://reprap.org/forum/read.php?1,592044,592093#msg-592093 https://reprap.org/forum/read.php?1,592044,592093#msg-592093 this. Haven't had a chance to use it yet, but it is for 30 AWG wire. This was suggested to me by someone else when I asked the same question.]]> ElmoC General Wed, 02 Dec 2015 17:50:20 -0500 https://reprap.org/forum/read.php?1,592044,592051#msg-592051 https://reprap.org/forum/read.php?1,592044,592051#msg-592051 imqqmi General Wed, 02 Dec 2015 16:00:22 -0500 https://reprap.org/forum/read.php?1,592044,592044#msg-592044 https://reprap.org/forum/read.php?1,592044,592044#msg-592044
- Dave P.]]> dpolly.jr General Wed, 02 Dec 2015 15:45:00 -0500