Hacking Zortrax M200? Hi, I got a zortrax m200 still working but making up problems due to old age (typical). I was wondering few things Can zortrax firmware use Gcode? Can I use opensource board like arduino due to power the current m200 hardwares? In accordance to the above, is there anyone succeeded in doing so especially in configuring the firmwares? Can I flash / upload opensource firmware into the current m200 board? Can I revert back to the original zortrax firmware if I used an opensource firmware? It is just that I'm beginning to grow tired of the zortrax systems https://reprap.org/forum/read.php?1,638219,638219#msg-638219 Thu, 18 Jun 2026 10:40:57 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,638219,829289#msg-829289 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,829289#msg-829289 forum.duet3d.com].

I understand that the M200 uses a thermocouple to measure heater temperature, not a thermistor. So you will either need to get electronics that supports thermocouples (with an adapter if necessary), or you will need to replace the thermocouple by a thermistor.]]> dc42 General Sun, 22 Jul 2018 14:55:07 -0400 https://reprap.org/forum/read.php?1,638219,829272#msg-829272 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,829272#msg-829272
I thought this thread is dead because there hasn't been any replies for more than a year, but it came back. Thank you for trying to keep this thread alive.

I do see someone modified the zortrax with open source electronics but unsure what board did he use.

I'm sure those who wanted to modify the zortrax mainboard or swapping, already grew tired of the zortrax systems, furthermore at 2018, (I'm pretty sure) they still uses perforated board that forces us to keep using rafts that is quite wasteful.

What board would you guys to recommend me to get?

@teachingtech, it is nice to have the guide. I was actually worried about the heater parts whether or not it will be compatible directly. Furthermore the stock zortrax m200, they uses the nozzle's end to sense the height.

What happened to the original board of the extruder part in your second video that you said it is a thermistor? I am thinking, can the stock zortrax extruder board be used directly on marlin or any open source firmware?]]> sarf2k4 General Sun, 22 Jul 2018 11:03:25 -0400 https://reprap.org/forum/read.php?1,638219,827405#msg-827405 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,827405#msg-827405
I am currently converting an M200 to Reprap electronics. Good news is I am documenting the build on YouTube.

Board is RUMBA, steppers are 0.9 NEMA17.

Build platform will have additional magnets added to hold a Prusa MK3 flex plate. There are two threaded holes at the back of the build platform (perforated plate removed) that line up exactly with the MK3 plate notches. It's uncanny.

Currently designing and iterating a Z endstop holder but my next step after this will be the fitment of a BLtouch.

Please check out the videos:

Part 1 (RUMBA change, configure Marlin from scratch): https://www.youtube.com/watch?v=ScTl4z5MHsg

Part 2 (Change steppers, design and make custom replacement breakout board PCB to interface ribbon cable from hot end to main board): https://www.youtube.com/watch?v=pBwQHdjVEKc

LCD change to come, hoping to keep it looking fairly neat. From what is posted here it seems too hard to retain the Zortrax unit.]]> TeachingTech General Sun, 01 Jul 2018 06:57:27 -0400 https://reprap.org/forum/read.php?1,638219,808775#msg-808775 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,808775#msg-808775
and for the end sensor just need to separate the pin , isolated it with tape , and plug it to the pin of the mother board.]]> olivmouth General Mon, 05 Feb 2018 06:04:39 -0500 https://reprap.org/forum/read.php?1,638219,808325#msg-808325 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,808325#msg-808325
for the wiring its not a problem , maybe the software part is harder , i go see with my friend who is better than me on this parts.]]> olivmouth General Fri, 02 Feb 2018 03:24:17 -0500 https://reprap.org/forum/read.php?1,638219,808156#msg-808156 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,808156#msg-808156

From the marking on the flat cable and board, the LCD controller seems to be an SSD1322U, probably driving a 256*64 graphical oled.

I don't think this is supported directly in Marlin firmware, but there is an arduino library for that so you could add the support if you can code: [github.com]
Or you could replace it with a 128*64 display which is supported.

Other firmwares : 8 ( ! ) years ago someone was working on driving that in repetier firmware : [forums.reprap.org]
This might have succeeded as nowadays there seems to be soem reference about this display in repetier firmware - search for "1322" in that file : [github.com]

Note that repetier also runs on some 32 bits motherboards, you might want to use that for a moderner setup.


I've only spent some minutes looking around for information, so you can probably get more.]]> DeuxVis General Thu, 01 Feb 2018 04:32:17 -0500 https://reprap.org/forum/read.php?1,638219,808060#msg-808060 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,808060#msg-808060
In first i want to have a working printer.
and in second time if we can that could be very interisting if i can use the lcd display or find compatible lcd ( same size )]]> olivmouth General Wed, 31 Jan 2018 09:11:55 -0500 https://reprap.org/forum/read.php?1,638219,808057#msg-808057 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,808057#msg-808057
the power is 24v
the motors are Nema ( as said by a french seller )

the architecture is quite same as some printer
3 motor nema
3 end sensor

2 temp sensor

, maybe the hardest part is the lcd . its hard to identify the circuit without unplug some part.


1517406799-img-3878.jpg - envoi d'image avec NoelShack
1517406660-img-3877.jpg - envoi d'image avec NoelShack
1517406648-img-3875.jpg - envoi d'image avec NoelShack
1517406683-img-3873.jpg - envoi d'image avec NoelShack
1517406675-img-3872.jpg - envoi d'image avec NoelShack
1517406724-img-3869.jpg - envoi d'image avec NoelShack
1517406786-img-3867.jpg - envoi d'image avec NoelShack
1517406782-img-3866.jpg - envoi d'image avec NoelShack
1517406802-img-3865.jpg - envoi d'image avec NoelShack
1517406797-img-3864.jpg - envoi d'image avec NoelShack
1517406786-img-3863.jpg - envoi d'image avec NoelShack]]> olivmouth General Wed, 31 Jan 2018 08:55:13 -0500 https://reprap.org/forum/read.php?1,638219,808031#msg-808031 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,808031#msg-808031
But as olivmouth have one he can contribute some good pictures !]]> DeuxVis General Wed, 31 Jan 2018 04:28:41 -0500 https://reprap.org/forum/read.php?1,638219,808011#msg-808011 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,808011#msg-808011 support.zortrax.com]

Its a big job... non reprap standard plugs, no documentation...

Ive managed to find only one image of the controller and its tiny

And doesn't even want to be linked, but here it is
[ksr-ugc.imgix.net]]]> Dust General Tue, 30 Jan 2018 23:14:40 -0500 https://reprap.org/forum/read.php?1,638219,807924#msg-807924 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,807924#msg-807924
It is possible to do, but I don't think we can help you on choosing a motherboard without more informations, because we have no idea what parts zortrax have employed.

Could you post some pictures of the elements (lcd display, encoder & extruder board, etc) you need to connect to the new motherboard ? This way we could try to identify them.


Also you should know it will take some work and time. As far as I can see they produced their own motherboards, with custom plugs : at the very least you'll have to modify all the cabling.


Enfin, si tu préfères t'exprimer en Français, c'est possible ici.]]> DeuxVis General Tue, 30 Jan 2018 09:25:31 -0500 https://reprap.org/forum/read.php?1,638219,807900#msg-807900 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,807900#msg-807900
Sorry for my english im not native ;)

Ive come here cause i think i have the same problem

Im french and i got a zortrax in a bankruptcy society without any MB, , and zortrax doesn't want to sell me one.

So i want to use an open source mother board with a friend but we don"t know what use.

He just want to put a ramps MB but i also want to re-use the lcd display and jog dial , cause i want to keep the printer user friendly and without anything not perfectly integrated.

Somebody actualy try it ?

wich kind of MB ?
Can we re-use the lcd screen or zortrax lcd is just fited for the zortrax Mother board ?
The ramps lcd looks like to have the same size , but i can't confirm it ?

Thanks for helping]]> olivmouth General Tue, 30 Jan 2018 07:07:37 -0500 https://reprap.org/forum/read.php?1,638219,691494#msg-691494 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,691494#msg-691494 sarf2k4 General Mon, 25 Jul 2016 05:33:28 -0400 https://reprap.org/forum/read.php?1,638219,671725#msg-671725 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,671725#msg-671725
Quote
hobbymods
I've just been asking about this.

I've got 4 of them and they've started burning motherboards. Just started with the 2 newest ones, the extruder heater mosfet is what has been blowing.

Problem is that they're weird and won't sell another motherboard until they've received the old one. Been waiting 3 weeks already since I sent it, no answer.

Looking at how standard all the hardware is, it would have to be straightforward enough to fit a Duet or Smoothie surely?

It's got a 24v power supply, basic pcb/thermistor bed heater (works pretty well, but maybe change to silicone while at it?), nema 17 steppers (just need to confirm under 2A, pretty sure they're 1.2A), a 3mm cylindrical K type thermocouple on the extruder, mechanical limit switches on the XY axis', a decent jog dial display with SD card socket connected by a ribbon cable.......it's all off the shelf basic components.

I'm game and will buy the components if the reprappers will talk me through.

It would be a nice start to open source builds, and get me some printers back up and running.

As we discussed by PM, I'll gladly help you configure a Duet 0.8.5 to do this. If you are interested then please start a thread on the Duet forum and provide details of the stepper motors that the machine uses.]]> dc42 General Mon, 06 Jun 2016 15:15:59 -0400 https://reprap.org/forum/read.php?1,638219,671555#msg-671555 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,671555#msg-671555
I've got 4 of them and they've started burning motherboards. Just started with the 2 newest ones, the extruder heater mosfet is what has been blowing.

Problem is that they're weird and won't sell another motherboard until they've received the old one. Been waiting 3 weeks already since I sent it, no answer.

Looking at how standard all the hardware is, it would have to be straightforward enough to fit a Duet or Smoothie surely?

It's got a 24v power supply, basic pcb/thermistor bed heater (works pretty well, but maybe change to silicone while at it?), nema 17 steppers (just need to confirm under 2A, pretty sure they're 1.2A), a 3mm cylindrical K type thermocouple on the extruder, mechanical limit switches on the XY axis', a decent jog dial display with SD card socket connected by a ribbon cable.......it's all off the shelf basic components.

I'm game and will buy the components if the reprappers will talk me through.

It would be a nice start to open source builds, and get me some printers back up and running.]]> hobbymods General Mon, 06 Jun 2016 08:07:02 -0400 https://reprap.org/forum/read.php?1,638219,638933#msg-638933 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,638933#msg-638933
I really don't like the idea of using perf board]]> sarf2k4 General Sun, 13 Mar 2016 01:59:37 -0500 https://reprap.org/forum/read.php?1,638219,638790#msg-638790 Re: Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,638790#msg-638790
As far as the printer itself is concerned, I'm still happy with it- though I wish there was a way to open source it.
You probably already know about Z-Temp?]]> gorgonaut General Sat, 12 Mar 2016 13:31:34 -0500 https://reprap.org/forum/read.php?1,638219,638219#msg-638219 Hacking Zortrax M200? https://reprap.org/forum/read.php?1,638219,638219#msg-638219
I was wondering few things
  1. Can zortrax firmware use Gcode?
  2. Can I use opensource board like arduino due to power the current m200 hardwares?
  3. In accordance to the above, is there anyone succeeded in doing so especially in configuring the firmwares?
  4. Can I flash / upload opensource firmware into the current m200 board?
  5. Can I revert back to the original zortrax firmware if I used an opensource firmware?

It is just that I'm beginning to grow tired of the zortrax systems]]> sarf2k4 General Fri, 11 Mar 2016 10:27:02 -0500