Hello Reprap! After i've updated from 15.04.06 to 2.1.2 (Cura) - i see blobs on my print :( it seems that it has a micro pause after each perimeter printer, where as the older version (15.04.06) did not - What could cause this? Did 15.04.06 have some kind of coasting distance preprogrammed? https://reprap.org/forum/read.php?1,678006,678006#msg-678006 Mon, 12 Oct 2026 15:06:04 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,678006,682350#msg-682350 https://reprap.org/forum/read.php?1,678006,682350#msg-682350
First, try uninstall it and reinstall it. You might have a older config file somewhere that is causing it to react badly.

Second, check if the filament has the same temperature configuration as before. Maybe the standard temperature for PLA has changed.

For stopping like this, it might be a communication problem too, you can check your cable.

Hope it helped!]]> Dyze_Design General Tue, 28 Jun 2016 16:39:00 -0400 https://reprap.org/forum/read.php?1,678006,678006#msg-678006 https://reprap.org/forum/read.php?1,678006,678006#msg-678006
After i've updated from 15.04.06 to 2.1.2 (Cura) - i see blobs on my print :( it seems that it has a micro pause after each perimeter printer, where as the older version (15.04.06) did not - What could cause this?
Did 15.04.06 have some kind of coasting distance preprogrammed?]]> Kafledelius General Sat, 25 Jun 2016 07:12:12 -0400