Currently using Repetier Host, slic3r and Marlin. Have one normal FFF/FDM extruder and another very different extruder. Tools offsets and temps are easy enough. I suppose you can't have different layer heights, but is there any way to have different print speeds, extrusion widths, etc. for each head? Thanks https://reprap.org/forum/read.php?1,708429,708429#msg-708429 Sat, 18 Jul 2026 20:46:35 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,708429,710086#msg-710086 https://reprap.org/forum/read.php?1,708429,710086#msg-710086 Theolodian General Tue, 27 Sep 2016 04:05:37 -0400 https://reprap.org/forum/read.php?1,708429,708622#msg-708622 https://reprap.org/forum/read.php?1,708429,708622#msg-708622 "#define PID_PARAMS_PER_EXTRUDER" for tuning the heaters in vastly different setup]]> jinx General Tue, 20 Sep 2016 04:14:12 -0400 https://reprap.org/forum/read.php?1,708429,708576#msg-708576 https://reprap.org/forum/read.php?1,708429,708576#msg-708576 chris33 General Mon, 19 Sep 2016 20:46:08 -0400 https://reprap.org/forum/read.php?1,708429,708500#msg-708500 https://reprap.org/forum/read.php?1,708429,708500#msg-708500 DaGameFace General Mon, 19 Sep 2016 14:25:13 -0400 https://reprap.org/forum/read.php?1,708429,708429#msg-708429 https://reprap.org/forum/read.php?1,708429,708429#msg-708429
Thanks]]> Theolodian General Mon, 19 Sep 2016 09:45:36 -0400