Bin Gear? [attachment 89421 IMG_9758.jpg] [attachment 89422 IMG_9760.jpg] [attachment 89423 IMG_9766.jpg] Are these any use? (probably not to me with my electronics skills) would anyone use them as is or would you salvage parts from them? https://reprap.org/forum/read.php?1,741272,741272#msg-741272 Mon, 20 Jul 2026 00:28:24 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,741272,741853#msg-741853 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741853#msg-741853 JamesK General Tue, 24 Jan 2017 15:22:52 -0500 https://reprap.org/forum/read.php?1,741272,741852#msg-741852 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741852#msg-741852 MechaBits General Tue, 24 Jan 2017 15:17:17 -0500 https://reprap.org/forum/read.php?1,741272,741801#msg-741801 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741801#msg-741801 www.orientalmotor.co.in]

Good for about 300 Oz-in if I read the spec right. I found one on ebay for about $400 CAD with shipping. Lucky you.]]> JamesK General Tue, 24 Jan 2017 12:25:04 -0500 https://reprap.org/forum/read.php?1,741272,741791#msg-741791 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741791#msg-741791 MechaBits General Tue, 24 Jan 2017 11:25:44 -0500 https://reprap.org/forum/read.php?1,741272,741788#msg-741788 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741788#msg-741788 JamesK General Tue, 24 Jan 2017 11:08:20 -0500 https://reprap.org/forum/read.php?1,741272,741787#msg-741787 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741787#msg-741787 MechaBits General Tue, 24 Jan 2017 11:04:12 -0500 https://reprap.org/forum/read.php?1,741272,741784#msg-741784 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741784#msg-741784 JamesK General Tue, 24 Jan 2017 10:37:34 -0500 https://reprap.org/forum/read.php?1,741272,741781#msg-741781 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741781#msg-741781
It has 6 wires 4 wires going to a DB15 and 2 other wires with ferrules on them, do they need to be used?
I thought this was a nema 23, but just seen some 23's and they looked smaller?
]]> MechaBits General Tue, 24 Jan 2017 10:33:26 -0500 https://reprap.org/forum/read.php?1,741272,741283#msg-741283 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741283#msg-741283
But reading this at the bottom of one of the pages
"Once you've got your hardware connected and tested, you will need to program your own particular application. A variety of additional documentation and source code programming examples are available in both Basic and C."
means they are probably better in pieces as I have no controller or SW writing ability:(

The plates & connectors might come in handy. Anyone else need them as is?]]> MechaBits General Sun, 22 Jan 2017 18:36:36 -0500 https://reprap.org/forum/read.php?1,741272,741282#msg-741282 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741282#msg-741282
And JamesK is right - the more modern PIC-SERVO controllers used in the PIC-SERVO boards are what I based the Servolulu controllers on.]]> LoboCNC General Sun, 22 Jan 2017 18:28:24 -0500 https://reprap.org/forum/read.php?1,741272,741280#msg-741280 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741280#msg-741280 JamesK General Sun, 22 Jan 2017 17:56:47 -0500 https://reprap.org/forum/read.php?1,741272,741277#msg-741277 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741277#msg-741277 MechaBits General Sun, 22 Jan 2017 17:47:22 -0500 https://reprap.org/forum/read.php?1,741272,741274#msg-741274 Re: Bin Gear? https://reprap.org/forum/read.php?1,741272,741274#msg-741274 forums.reprap.org] ?

Edit: apparently still for sale at $160 per board [www.jrkerr.com]]]> JamesK General Sun, 22 Jan 2017 17:35:32 -0500 https://reprap.org/forum/read.php?1,741272,741272#msg-741272 Bin Gear? https://reprap.org/forum/read.php?1,741272,741272#msg-741272 [attachment 89422 IMG_9760.jpg]
[attachment 89423 IMG_9766.jpg]

Are these any use? (probably not to me with my electronics skills)
would anyone use them as is or would you salvage parts from them?]]> MechaBits General Sun, 22 Jan 2017 17:28:03 -0500