printer halted kill called() after z axis homing hi friends after running printer and homing z axis this error is shown printer halted kill called() what should i do? i using the rumba board https://reprap.org/forum/read.php?1,841234,841234#msg-841234 Sat, 10 Oct 2026 19:46:31 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,841234,842209#msg-842209 Re: printer halted kill called() after z axis homing https://reprap.org/forum/read.php?1,841234,842209#msg-842209 Number_5 General Sun, 23 Dec 2018 10:31:40 -0500 https://reprap.org/forum/read.php?1,841234,842076#msg-842076 Re: printer halted kill called() after z axis homing https://reprap.org/forum/read.php?1,841234,842076#msg-842076
it is possible that thermistor has electrical issues such as bad wiring and movement causes a misread,

and this will trigger printer to kill function for safety to prevent a nozzle overheating.

of course seeing output log from printer responses will help more, as well as looking at config settings.

i'm sure someone here will help you!]]> jamesdanielv General Fri, 21 Dec 2018 09:22:11 -0500 https://reprap.org/forum/read.php?1,841234,841328#msg-841328 Re: printer halted kill called() after z axis homing https://reprap.org/forum/read.php?1,841234,841328#msg-841328

and I should say
I do not use heat bed and its thermistor]]> mohammad.ak General Fri, 14 Dec 2018 03:39:18 -0500 https://reprap.org/forum/read.php?1,841234,841319#msg-841319 Re: printer halted kill called() after z axis homing https://reprap.org/forum/read.php?1,841234,841319#msg-841319 Dust General Fri, 14 Dec 2018 02:02:12 -0500 https://reprap.org/forum/read.php?1,841234,841314#msg-841314 Re: printer halted kill called() after z axis homing https://reprap.org/forum/read.php?1,841234,841314#msg-841314
but I have three endstop in x,y And z axis and

I checked them with send M119 in activating/deactivate modes

They do Their duty correctly]]> mohammad.ak General Fri, 14 Dec 2018 01:15:11 -0500 https://reprap.org/forum/read.php?1,841234,841247#msg-841247 Re: printer halted kill called() after z axis homing https://reprap.org/forum/read.php?1,841234,841247#msg-841247
[github.com]]]> Roberts_Clif General Thu, 13 Dec 2018 08:06:41 -0500 https://reprap.org/forum/read.php?1,841234,841234#msg-841234 printer halted kill called() after z axis homing https://reprap.org/forum/read.php?1,841234,841234#msg-841234
after running printer and homing z axis
this error is shown
printer halted kill called()
what should i do?

i using the rumba board]]> mohammad.ak General Thu, 13 Dec 2018 05:26:14 -0500