Medium Size CoreXY Build & Enclosures Hello all, this is my first post on here. I'm looking to build a corexy printer with a enclosure or possibly panels bolted to the outside. Any ideas for a build that would be good for printing with carbon fiber, nylon, etc.? Thanks https://reprap.org/forum/read.php?1,845342,845342#msg-845342 Mon, 11 May 2026 02:01:08 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,845342,846112#msg-846112 Re: Medium Size CoreXY Build & Enclosures https://reprap.org/forum/read.php?1,845342,846112#msg-846112
Quote
Origamib
Has a piper 2 been made before? Renders look incomplete with no motors, transmission, electronics, bed or any noticeable way of attaching panels.

I have 3 Piper 2 version 1 built (not enclosed) 250x250x300 (was shown at ERRF 2018), 300x300x300 (dual head), and 600x450x400 (was shown at Worlds Maker Fair 2018).
I am in the process of making Piper 2 version 2 myself so no complete pictures yet.
The mechanical portion of version 2 is not different from version 1. And if you speak about price - Piper 2 is your lowest bet.]]> piper3d General Sun, 03 Feb 2019 22:32:36 -0500 https://reprap.org/forum/read.php?1,845342,846071#msg-846071 Re: Medium Size CoreXY Build & Enclosures https://reprap.org/forum/read.php?1,845342,846071#msg-846071
Challenge: Find the only one that is mechanically sound, properly built and therefore working well. Understand why then you are ready to go ahead, scale it down eventually :)]]> MKSA General Sun, 03 Feb 2019 08:59:52 -0500 https://reprap.org/forum/read.php?1,845342,846063#msg-846063 Re: Medium Size CoreXY Build & Enclosures https://reprap.org/forum/read.php?1,845342,846063#msg-846063
Quote
piper3d
You may try Piper 2 version 2 enclosed: [www.thingiverse.com].


[attachment 109817 Piper2.2.png]

Has a piper 2 been made before? Renders look incomplete with no motors, transmission, electronics, bed or any noticeable way of attaching panels.

Best there is at the moment is probably Dbot or railcore. I'm very impressed by the railcore these days, but the Dbot is easily half the price if you are willing to accept the compromises.]]> Origamib General Sun, 03 Feb 2019 06:14:55 -0500 https://reprap.org/forum/read.php?1,845342,846030#msg-846030 Re: Medium Size CoreXY Build & Enclosures https://reprap.org/forum/read.php?1,845342,846030#msg-846030 www.thingiverse.com].


[attachment 109817 Piper2.2.png]]]> piper3d General Sat, 02 Feb 2019 18:43:08 -0500 https://reprap.org/forum/read.php?1,845342,845342#msg-845342 Medium Size CoreXY Build & Enclosures https://reprap.org/forum/read.php?1,845342,845342#msg-845342
Thanks]]> JGood General Fri, 25 Jan 2019 12:48:04 -0500