Printing dental temporary crowns

Printing dental temporary crowns If the right filament material is available, it seems practical for dentist to 3D print temporary crowns. Multiple images of the tooth to crown could be used for a 3D scan. Custom software or settings would probably make the software finish in less time. A 3D-printed temporary crown would probably take less work to get it to fit properly. Anyone know of development to do this? This probably would take a series of clinical trials to get FDA approval. https://reprap.org/forum/read.php?1,873804,873804#msg-873804 Fri, 11 Sep 2026 13:07:40 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,873804,873913#msg-873913 Re: Printing dental temporary crowns https://reprap.org/forum/read.php?1,873804,873913#msg-873913 pvwebb General Thu, 18 Jun 2020 09:49:25 -0400 https://reprap.org/forum/read.php?1,873804,873839#msg-873839 Re: Printing dental temporary crowns https://reprap.org/forum/read.php?1,873804,873839#msg-873839

Quote
pvwebb
Here's a link given me: [all3dp.com]

If you read your link, they already do 3D printed crowns, but use special materials. FDM printers wouldn't be capable of this based on how they build layers.

Quote

Dental 3D printing has made creating crowns incredibly simple. The doctor scans the broken tooth and then uses software to create the model of the crown. They can create it in their office in less than 30 minutes using either a special resin or CNC technology to carve the crown out of porcelain.

]]> PDBeal General Tue, 16 Jun 2020 11:41:11 -0400 https://reprap.org/forum/read.php?1,873804,873834#msg-873834 Re: Printing dental temporary crowns https://reprap.org/forum/read.php?1,873804,873834#msg-873834 all3dp.com]]]> pvwebb General Tue, 16 Jun 2020 09:19:41 -0400 https://reprap.org/forum/read.php?1,873804,873820#msg-873820 Re: Printing dental temporary crowns https://reprap.org/forum/read.php?1,873804,873820#msg-873820 By the time you will get through FDA with that 3d printer and material (specially material) you may be well be past price point of CEREC CNC machines.
For example:
CNC machines do not deal with internal pores of the material where 3d printer do.
Any pores left by 3d printer between layers would be a potential bio or chemical hazard for the patient (chemical in case of use of SLA/DLP printing techniques).

But solving some of the problems may lead you to the new areas of application, so good luck. :)]]> piper3d General Mon, 15 Jun 2020 20:21:56 -0400 https://reprap.org/forum/read.php?1,873804,873804#msg-873804 Printing dental temporary crowns https://reprap.org/forum/read.php?1,873804,873804#msg-873804 pvwebb General Mon, 15 Jun 2020 08:59:44 -0400