Hi, i recently got a broken artillery sidewinder x1 from a friend to tinker or repair. it uses and MKS gen L v1.0 board and I updated the marlin to the newest version. in regular intervals i get a min temp error on the bed. this is a common problem on the machine an I will change the thermistor cable soon. however i can see any temp drops while in use. the heating curve look fine. and there are not noteworthy fluctation in the temps and none that are as severe to trigger a min temp. any idea what else could cause min temp? https://reprap.org/forum/read.php?1,892193,892193#msg-892193 Sat, 08 Aug 2026 05:38:54 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?1,892193,892197#msg-892197 https://reprap.org/forum/read.php?1,892193,892197#msg-892197
I would try adjusting PIDTEMP or PIDTEMPBED again]]> Roberts_Clif General Tue, 07 Mar 2023 18:06:03 -0500 https://reprap.org/forum/read.php?1,892193,892193#msg-892193 https://reprap.org/forum/read.php?1,892193,892193#msg-892193
i recently got a broken artillery sidewinder x1 from a friend to tinker or repair.

it uses and MKS gen L v1.0 board and I updated the marlin to the newest version.

in regular intervals i get a min temp error on the bed. this is a common problem on the machine an I will change the thermistor cable soon.

however i can see any temp drops while in use. the heating curve look fine. and there are not noteworthy fluctation in the temps and none that are as severe to trigger a min temp.

any idea what else could cause min temp?]]> sungod3k General Tue, 07 Mar 2023 11:23:52 -0500