I'm selling my custom built 3d printer due to now having a daughter which takes up most of my time. I had built this printer with the plan to close up the inner cube with sheet metal to have a enclosed printing area to better control temperatures and then also wall up the outside of the printer to keep all the wiring and motors out of sight. So still a little work to do if you wanted to take it that far. Other than aesthetics the printer prints quite well, I've attached some examples of things I have printed in the past with it. The printing area is roughly 23cm x 34cm x 19cm. It's very sturdy built mostly of extruded aluminium and printed parts of abs. The printer is a XY core and runs off the Marlin open source software. Being open source I added auto bed leveling to the printer and boy does that make a difference, love that feature. There are 5 nema 17 motors on the machine which were made in the USA, not cheap Chinese motors. It has an original E3D V6 nozzle ordered from E3D themselves and I have a second generic "e3d v6" nozzle from china as well which hasn't been used yet. The motor drivers are TMC2100's running off a RAMPS 1.4 board connected to an arduino. The printing bed also has a heater attached to the bottom of it with a controller for setting the temperature. On top of the printer I am adding in some spare parts and a bunch of spools of various materials(ABS, PLA, Nina-Flex, T-Glass and PetG). Also I own a license of Simplify3D which I could throw into the deal, that alone is worth $150 usd. I'm asking for $1,300 for all of it. Craigslist Ad for Printer plus Pictures https://reprap.org/forum/read.php?105,752481,752481#msg-752481 Thu, 05 Mar 2026 09:59:21 -0500 Phorum 5.2.23 https://reprap.org/forum/read.php?105,752481,752481#msg-752481 https://reprap.org/forum/read.php?105,752481,752481#msg-752481
Other than aesthetics the printer prints quite well, I've attached some examples of things I have printed in the past with it. The printing area is roughly 23cm x 34cm x 19cm. It's very sturdy built mostly of extruded aluminium and printed parts of abs. The printer is a XY core and runs off the Marlin open source software. Being open source I added auto bed leveling to the printer and boy does that make a difference, love that feature. There are 5 nema 17 motors on the machine which were made in the USA, not cheap Chinese motors. It has an original E3D V6 nozzle ordered from E3D themselves and I have a second generic "e3d v6" nozzle from china as well which hasn't been used yet. The motor drivers are TMC2100's running off a RAMPS 1.4 board connected to an arduino. The printing bed also has a heater attached to the bottom of it with a controller for setting the temperature.

On top of the printer I am adding in some spare parts and a bunch of spools of various materials(ABS, PLA, Nina-Flex, T-Glass and PetG). Also I own a license of Simplify3D which I could throw into the deal, that alone is worth $150 usd. I'm asking for $1,300 for all of it.

Craigslist Ad for Printer plus Pictures]]> GenericArt Canada, Vancouver RepRap User Group Wed, 01 Mar 2017 17:13:01 -0500