We're just finished building a custom made heated chamber and noticed that waiting around 50 minutes the chamber reached a temperature of 41 degrees (105 fahrenheit). Now we're wondering what them maximum temperature the minitronics v10 ( Wiki minitronics 10) and the stepper drivers of this board. https://reprap.org/forum/read.php?13,242610,242610#msg-242610 Wed, 12 Aug 2026 01:55:38 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?13,242610,242681#msg-242681 https://reprap.org/forum/read.php?13,242610,242681#msg-242681
FET's (used to drive the heated bed/hot end) and the stepper drivers need to dissipate heat when they work, due to their internal resistance. You can't dissipate heat as well into a hot environment, and if you don't dissipate the heat fast enough, things can fail.

This is why it's recommended that all steppers have heatsinks and that all electronics boards are cooled with a fan, to remove this heat. Usually the max recommended is 50-60 Deg C operating temp, with things being more efficient at lower temps.]]> Cefiar Controllers Wed, 04 Sep 2013 18:58:54 -0400 https://reprap.org/forum/read.php?13,242610,242610#msg-242610 https://reprap.org/forum/read.php?13,242610,242610#msg-242610 noticed that waiting around 50 minutes the chamber reached a temperature of 41 degrees (105 fahrenheit).

Now we're wondering what them maximum temperature the minitronics v10 ( Wiki minitronics 10) and the stepper drivers of this board.]]> Kirschner3D Controllers Wed, 04 Sep 2013 13:21:57 -0400