RADDS work now stable with RepRap Firmware Hello, Dan Newmann has make an amazing Job. I will looking for guys who would like to test it and can give us a Feedback. For the first 3 Tester I will give a RADDS v.1.5 and 4xRaps128 + a RADDS LCD-Display for free. You have to look for the Shipping cost + the Arduino Due (UDOO Quad ...). Thank you in advance. https://github.com/dcnewman/RepRapFirmware/blob/dev/doc/RADDS-v1.5.md https://www.youtube.com/watch?v=IxniBllWmrY&feature=youtu.be https://reprap.org/forum/read.php?13,569468,569468#msg-569468 Sat, 07 Mar 2026 17:12:45 -0500 Phorum 5.2.23 https://reprap.org/forum/read.php?13,569468,847029#msg-847029 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,847029#msg-847029 VDX Controllers Thu, 14 Feb 2019 17:44:09 -0500 https://reprap.org/forum/read.php?13,569468,847015#msg-847015 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,847015#msg-847015 spinor Controllers Thu, 14 Feb 2019 14:53:54 -0500 https://reprap.org/forum/read.php?13,569468,847004#msg-847004 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,847004#msg-847004 VDX Controllers Thu, 14 Feb 2019 13:38:01 -0500 https://reprap.org/forum/read.php?13,569468,846999#msg-846999 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,846999#msg-846999 spinor Controllers Thu, 14 Feb 2019 13:06:22 -0500 https://reprap.org/forum/read.php?13,569468,846991#msg-846991 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,846991#msg-846991 VDX Controllers Thu, 14 Feb 2019 12:39:19 -0500 https://reprap.org/forum/read.php?13,569468,846988#msg-846988 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,846988#msg-846988 spinor Controllers Thu, 14 Feb 2019 12:02:31 -0500 https://reprap.org/forum/read.php?13,569468,846053#msg-846053 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,846053#msg-846053 VDX Controllers Sun, 03 Feb 2019 04:47:55 -0500 https://reprap.org/forum/read.php?13,569468,846045#msg-846045 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,846045#msg-846045 dc42 Controllers Sun, 03 Feb 2019 02:42:03 -0500 https://reprap.org/forum/read.php?13,569468,846038#msg-846038 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,846038#msg-846038
That being said, I saw something you guys might be interested in. Adafruit has released their Grand Central M4 Express board which is running a ATSAMD51P20 and has the same foot print as the Arduino Mega and Due.

Here is the product page: [www.adafruit.com]

Here is the product overview: [learn.adafruit.com]

It is basically a Due on steroids. It is running at 120Mhz, has 256K RAM, 1M of on uC Flash, 8M of QSPI flash, and a JTAG connector. The only thing I can knock them on it is that the SD card is hooked up exactly like the one on the RADDS.]]> CthulhuLabs Controllers Sun, 03 Feb 2019 00:29:56 -0500 https://reprap.org/forum/read.php?13,569468,842994#msg-842994 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,842994#msg-842994 deaconfrost Controllers Mon, 31 Dec 2018 09:37:30 -0500 https://reprap.org/forum/read.php?13,569468,842952#msg-842952 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,842952#msg-842952 duet3d.dozuki.com] are independent of board type, except of course any mention of networking or Duet Web Control doesn't apply to RADDS.]]> dc42 Controllers Mon, 31 Dec 2018 01:54:40 -0500 https://reprap.org/forum/read.php?13,569468,842946#msg-842946 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,842946#msg-842946
thanks]]> deaconfrost Controllers Sun, 30 Dec 2018 19:52:50 -0500 https://reprap.org/forum/read.php?13,569468,842454#msg-842454 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,842454#msg-842454 github.com].]]> dc42 Controllers Thu, 27 Dec 2018 05:46:13 -0500 https://reprap.org/forum/read.php?13,569468,837847#msg-837847 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,837847#msg-837847 dc42 Controllers Tue, 06 Nov 2018 09:59:15 -0500 https://reprap.org/forum/read.php?13,569468,837793#msg-837793 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,837793#msg-837793 CthulhuLabs Controllers Mon, 05 Nov 2018 13:51:00 -0500 https://reprap.org/forum/read.php?13,569468,837409#msg-837409 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,837409#msg-837409
Quote
CthulhuLabs
@dc42 I may have time in the coming months to take it over. Also did you happen to see the issue I opened on GitHub about the MAX endstop pins. Earlier on in this thread you mentioned that you just needed to know where on the Due they were wired to.

[github.com]

@CthulhuLabs, are you interested in taking this over? If so then I will do a RADDS-RTOS build of the forthcoming 2.02 release of RRF and hand it over to you for testing.]]> dc42 Controllers Wed, 31 Oct 2018 06:56:39 -0400 https://reprap.org/forum/read.php?13,569468,831425#msg-831425 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,831425#msg-831425 dc42 Controllers Fri, 17 Aug 2018 07:55:20 -0400 https://reprap.org/forum/read.php?13,569468,831390#msg-831390 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,831390#msg-831390
[github.com]]]> CthulhuLabs Controllers Thu, 16 Aug 2018 17:11:04 -0400 https://reprap.org/forum/read.php?13,569468,830566#msg-830566 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,830566#msg-830566 github.com]. Build 1.22 for Duet is stable.

From memory, the main things you need to be aware of when upgrading from 1.14 are:

- You need to PID-tune your heaters (M303) otherwise you are likely to get heater fault messages
- You won't be able to move axes before homing them unless you put M564 H0 in config,g
- If your printer is a CoreXY then you will need to reverse the Y motor direction (M569)
- The deployprobe.g and retractprobe.g files are run automatically when bed probing, so make sure that you don't have any that you are not using in /sys on the SD card.

There may be other things that I have forgotten. Read the "Upgrade notes" sections of the release notes at [github.com] to check, for all versions after the one you are upgrading from.]]> dc42 Controllers Wed, 08 Aug 2018 02:23:52 -0400 https://reprap.org/forum/read.php?13,569468,830491#msg-830491 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,830491#msg-830491
I want to try to pressure feature but im on 1.14 and I hear its bug on this version so im looking to flash the last release I guess but since im coming from 1.14 there are LOT of stuff fix or added . I check the change log quickly but my version is so old and lot of stuff do not apply to us I guess...

Can anyone give me the big change here ? I dont use a lot of feature, I mainly want to know if there something that should be change in my config coming from 1.14 or the way we print.

Also 1.21 release on june 5 is the right one to flash right ? I want a stable release ( dont want to beta test the very last untested one)]]> GroupB Controllers Tue, 07 Aug 2018 08:40:38 -0400 https://reprap.org/forum/read.php?13,569468,828556#msg-828556 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,828556#msg-828556 github.com].]]> dc42 Controllers Sat, 14 Jul 2018 15:40:55 -0400 https://reprap.org/forum/read.php?13,569468,828428#msg-828428 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,828428#msg-828428 LB Controllers Thu, 12 Jul 2018 14:50:53 -0400 https://reprap.org/forum/read.php?13,569468,828426#msg-828426 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,828426#msg-828426
Quote
LB
WOW!

Would you care to elaborate?]]> dc42 Controllers Thu, 12 Jul 2018 14:27:55 -0400 https://reprap.org/forum/read.php?13,569468,828419#msg-828419 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,828419#msg-828419 LB Controllers Thu, 12 Jul 2018 13:10:33 -0400 https://reprap.org/forum/read.php?13,569468,821962#msg-821962 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,821962#msg-821962
Quote
Holy1
Hi, thank you for the development of Rerapfirmware. I currently am using Radds with Repetier with no issues. I don't require auto levelling so wondered if I will notice an improvement in print quality if I switch from Repetier.
Or is the RepRap firmware just easier to use? Does it support the LCD display?

It's not possible to generalise. Several users have reported an improvement in print quality when switching to RepRapFirmware from other firmwares - and one user recently reported a reduction in print quality. RRF may be a little less tolerant of bad GCode than other firmwares, because it controls extruder jerk, whereas many other firmwares don't.

Currently the only LCD supported by RepRapFirmware on RADDS is the PanelDue. There is ongoing work to support a 12864-style graphical LCD on the new Duet Maestro and it should be possible to back-port it to RADDS. However, I won't be doing that back-porting because I don't plan to do any more releases for the SAM3X-based boards after the forthcoming 1.21.1 maintenance release. This is because most SAM3X-based boards don't have enough RAM to support the real time operating system (RTOS) that RepRapFirmware version 2.0 uses. The RADDS build could probably support RTOS because it has no networking support (because RADDS has neither WiFi nor Ethernet) so it has more free RAM.

I was hoping that either the manufacturer of RADDS or someone else would take responsibility for the RADDS port of RRF, but that hasn't happened. If anyone does take that on and gets the RTOS build of RRF for RADDS working (which should be easy to do - I can advise if necessary), then I'll accept pull requests so that it can be kept in step with the Duet builds of RRF.

btw I released a RADDS build of RRF 1.21.1RC2a earlier today.]]> dc42 Controllers Sat, 12 May 2018 12:48:21 -0400 https://reprap.org/forum/read.php?13,569468,821928#msg-821928 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,821928#msg-821928 Or is the RepRap firmware just easier to use? Does it support the LCD display?]]> Holy1 Controllers Sat, 12 May 2018 07:14:25 -0400 https://reprap.org/forum/read.php?13,569468,821381#msg-821381 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,821381#msg-821381 forum.duet3d.com] for details.]]> dc42 Controllers Sat, 05 May 2018 16:26:16 -0400 https://reprap.org/forum/read.php?13,569468,816682#msg-816682 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,816682#msg-816682 www.duet3d.com]. Feel free to use it, or to continue the discussion here. Or both.]]> dc42 Controllers Sat, 31 Mar 2018 07:40:16 -0400 https://reprap.org/forum/read.php?13,569468,811650#msg-811650 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,811650#msg-811650
If you want to support the TMC2130, you could adapt the TMC2660 code.]]> dc42 Controllers Fri, 23 Feb 2018 15:08:15 -0500 https://reprap.org/forum/read.php?13,569468,811646#msg-811646 Re: RADDS work now stable with RepRap Firmware https://reprap.org/forum/read.php?13,569468,811646#msg-811646 mrwizzard Controllers Fri, 23 Feb 2018 14:41:48 -0500