https://reprap.org/forum/list.php?134 Tue, 08 Sep 2026 12:17:33 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?134,112923,112923#msg-112923 https://reprap.org/forum/read.php?134,112923,112923#msg-112923
- I have Ramps 1.4
- I have swaped the E0 & E1 due to a poorly placed heat sink on the sheild (I have switched the pin.h file also)
- X,Y,&Z work as they should (E works when plugged into one of them)
- Pololu works when plugged into X socket
- Using Repetier firmware & host because sprinter and reprap host seemed to freeze when connecting
- If I send a print job (GCode) through Repetier everything except for the extruder seems to work fine

My next step will probably be to remove the interfering heat sink and try in the E0 position but I'm not as comfortable with that idea.

Any thoughts?]]> M.Kots Canada Waterloo RUG Tue, 10 Jan 2012 11:22:55 -0500 https://reprap.org/forum/read.php?134,107406,107406#msg-107406 https://reprap.org/forum/read.php?134,107406,107406#msg-107406
Please follow the blog of my build at My blog! Feedback is encouraged.

Thanks for the read. And happy RepRapping!!!]]> finks Canada Waterloo RUG Wed, 23 Nov 2011 10:43:26 -0500 https://reprap.org/forum/read.php?134,107278,107278#msg-107278 https://reprap.org/forum/read.php?134,107278,107278#msg-107278
Thanks
Mark]]> M.Kots Canada Waterloo RUG Wed, 04 Nov 2015 08:40:54 -0500 https://reprap.org/forum/read.php?134,86889,86889#msg-86889 https://reprap.org/forum/read.php?134,86889,86889#msg-86889 Nether10 Canada Waterloo RUG Sun, 12 Jun 2011 18:57:28 -0400 https://reprap.org/forum/read.php?134,86849,86849#msg-86849 https://reprap.org/forum/read.php?134,86849,86849#msg-86849 CatherineH Canada Waterloo RUG Sun, 12 Jun 2011 18:10:53 -0400 https://reprap.org/forum/read.php?134,77471,77471#msg-77471 https://reprap.org/forum/read.php?134,77471,77471#msg-77471 Nether10 Canada Waterloo RUG Tue, 14 Feb 2012 08:52:31 -0500 https://reprap.org/forum/read.php?134,69215,69215#msg-69215 https://reprap.org/forum/read.php?134,69215,69215#msg-69215
* Definitely a fixer-upper. Only request it if you have a serious interest in getting it working.
* Includes three stepper drivers, but no other electronics boards (Extruder controller, motherboard, and power supply will be required)
* The x belt slips a bit, and some of the parts are cracked, but it should not require any printed part replacements to get working.
* Must be willing to pick up from my house in Kitchener

I followed the instructions here to create it: [reprap.org]]]> dbenoy Canada Waterloo RUG Mon, 10 Jan 2011 11:24:05 -0500 https://reprap.org/forum/read.php?134,31320,31320#msg-31320 https://reprap.org/forum/read.php?134,31320,31320#msg-31320 FredWalter Canada Waterloo RUG Wed, 16 Mar 2011 20:45:33 -0400