Easy drill extruder bolt Hi! I just found these bolts at mcmaster. It seems that there are vented bolts (first time I saw this). Check this one out, it has a hole about 0.1" for air venting. Should be relatively easy to drill out to the 3mm size! Cool thing is this is probably a standard product, i.e. there should be more sources [www.mcmaster.com] Or go: Fastening & Joining => Fasteners => Screws and bolts => Socket Cap Screws => Vented https://reprap.org/forum/read.php?14,26197,26197#msg-26197 Tue, 16 Jun 2026 08:17:50 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?14,26197,26244#msg-26244 Re: Easy drill extruder bolt https://reprap.org/forum/read.php?14,26197,26244#msg-26244
Answer: .093 " = 2.3622 mm

Now if say this is a part at the bottom of pressure cooker (electic version is there such a thing?) that will with swell extrudes a three millimeter fiber?

How many PSI can a presure cooker handle?]]> freds Mechanics Wed, 12 Aug 2009 22:21:27 -0400 https://reprap.org/forum/read.php?14,26197,26215#msg-26215 Re: Easy drill extruder bolt https://reprap.org/forum/read.php?14,26197,26215#msg-26215
Quote

Should be relatively easy to drill out to the 3mm size!
1.5" 18-8 Stainless Steel easy to drill?

please try and report

'sid]]> sid Mechanics Wed, 12 Aug 2009 07:19:41 -0400 https://reprap.org/forum/read.php?14,26197,26197#msg-26197 Easy drill extruder bolt https://reprap.org/forum/read.php?14,26197,26197#msg-26197
I just found these bolts at mcmaster. It seems that there are vented bolts (first time I saw this).

Check this one out, it has a hole about 0.1" for air venting. Should be relatively easy to drill out to the 3mm size!

Cool thing is this is probably a standard product, i.e. there should be more sources

[www.mcmaster.com]

Or go: Fastening & Joining => Fasteners => Screws and bolts => Socket Cap Screws => Vented]]> mimarob Mechanics Tue, 11 Aug 2009 19:52:50 -0400