Hi, I know it's a little off topic, but I had no idea where to post my question and find someone who could give me a hint. I need to build a table tiltable.. sort of a foldaway table that I can use as a diaper-changing table since we have a tiny bathroom and no other place to put it. Furthermore, there’s a radiator on the wall and I need to put it somehow around that. I am not allowed to drill any hole in the wall and the radiator cannot deal with a lot of load. I want to be able to pull down the table with one hand while having my baby on the other arm. I already made a plan and I am pretty convinced that it's a good idea to make a frame behind the radiator with aluminium profiles. As this is hard to explain I made a 3-D drawing using tinkercad here (you can switch to 3d mode an move it around): https://www.tinkercad.com/things/8lcO6oVgw1x-klapptisch The aluminium parts are painted gray while the wooden plate is brown. For the radiator I inserted the red block Now my question: Is there any slide that I could insert in these aluminum notches (The small black part in the drawing)? The slide doesn't need to handle a lot it's just to bring down the diagonal supporters in the right place? Thank you for any suggestion! Ray https://reprap.org/forum/read.php?14,570966,570966#msg-570966 Tue, 21 Jul 2026 13:14:54 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?14,570966,571655#msg-571655 https://reprap.org/forum/read.php?14,570966,571655#msg-571655 the_digital_dentist Mechanics Fri, 16 Oct 2015 20:14:49 -0400 https://reprap.org/forum/read.php?14,570966,571635#msg-571635 https://reprap.org/forum/read.php?14,570966,571635#msg-571635

FOLDING SHELF BRACKETS/DROP LEAF TABLE SUPPORTS

[www.thehardwarehut.com]

:S]]> cozmicray Mechanics Fri, 16 Oct 2015 18:57:44 -0400 https://reprap.org/forum/read.php?14,570966,571201#msg-571201 https://reprap.org/forum/read.php?14,570966,571201#msg-571201 ekaggrat Mechanics Thu, 15 Oct 2015 22:33:08 -0400 https://reprap.org/forum/read.php?14,570966,570966#msg-570966 https://reprap.org/forum/read.php?14,570966,570966#msg-570966
I know it's a little off topic, but I had no idea where to post my question and find someone who could give me a hint.

I need to build a table tiltable.. sort of a foldaway table that I can use as a diaper-changing table since we have a tiny bathroom and no other place to put it. Furthermore, there’s a radiator on the wall and I need to put it somehow around that. I am not allowed to drill any hole in the wall and the radiator cannot deal with a lot of load.

I want to be able to pull down the table with one hand while having my baby on the other arm. I already made a plan and I am pretty convinced that it's a good idea to make a frame behind the radiator with aluminium profiles.

As this is hard to explain I made a 3-D drawing using tinkercad here (you can switch to 3d mode an move it around):
https://www.tinkercad.com/things/8lcO6oVgw1x-klapptisch
The aluminium parts are painted gray while the wooden plate is brown. For the radiator I inserted the red block

Now my question:
Is there any slide that I could insert in these aluminum notches (The small black part in the drawing)? The slide doesn't need to handle a lot it's just to bring down the diagonal supporters in the right place?

Thank you for any suggestion!
Ray]]> Ray01 Mechanics Thu, 15 Oct 2015 09:02:42 -0400