Extruders compatibility Hi, The place where I work recently purchased a CreatBot DE printer, this one: creatbot-de-plus.png mod_embed_images_loadimage('13c56b8596612230f9787e1d0beda8b9', 'https://reprap.org/forum/addon.php?14,module=embed_images,url=http%3A%2F%2Fwww.creatbot.com%2Fimages%2Ftemplate%2Fcreatbot-de-plus.png', 'http://www.creatbot.com/images/template/creatbot-de-plus.png', 'https://reprap.org/forum/addon.php?14,module=embed_images,check_scaling=1,url=http%3A%2F%2Fwww.creatbot.com%2Fimages%2Ftemplate%2Fcreatbot-de-plus.png', '', 659896, 800, 400, 'Loading image ...', false); We currently want to change the extruders because all of the three hot ends get blocked during the prints, but we are no sure about the hot ends compatibility... We have the three extruders model, pretty similar to this one: HTB1GpTEHpXXXXaRXVXXq6xXFXXXI.jpg mod_embed_images_loadimage('997fe96075da247bee7ec44519350b38', '/forum/thumbcache/f40/e74/6ae/97f/2e7/e18/588/363/824/9a9/35_800x400.jpg', 'http://g02.s.alicdn.com/kf/HTB1GpTEHpXXXXaRXVXXq6xXFXXXI/221785248/HTB1GpTEHpXXXXaRXVXXq6xXFXXXI.jpg', 'https://reprap.org/forum/addon.php?14,module=embed_images,check_scaling=1,url=http%3A%2F%2Fg02.s.alicdn.com%2Fkf%2FHTB1GpTEHpXXXXaRXVXXq6xXFXXXI%2F221785248%2FHTB1GpTEHpXXXXaRXVXXq6xXFXXXI.jpg', '', 659896, 800, 400, 'Loading image ...', false); Can anyone please tell me how can I know if the aftermarket Hot ends are compatible with these ones? https://reprap.org/forum/read.php?14,659896,659896#msg-659896 Fri, 09 Oct 2026 00:24:49 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?14,659896,725208#msg-725208 Re: Extruders compatibility https://reprap.org/forum/read.php?14,659896,725208#msg-725208 By changing the ventilation of HotEnd I got some improvement.
Thanks.]]> maxprints Mechanics Wed, 23 Nov 2016 02:51:20 -0500 https://reprap.org/forum/read.php?14,659896,725100#msg-725100 Re: Extruders compatibility https://reprap.org/forum/read.php?14,659896,725100#msg-725100
Chris

[www.thingiverse.com]]]> staalc Mechanics Tue, 22 Nov 2016 14:40:39 -0500 https://reprap.org/forum/read.php?14,659896,724323#msg-724323 Re: Extruders compatibility https://reprap.org/forum/read.php?14,659896,724323#msg-724323
Quote
staalc
Hi, I have a creatbot dx plus and have replaced the hot ends with e3d v5s.

It works really well very reliable. Drawback is you lose a bit of print height probably 30mm.

If your interested I can give you a write up of the mods required, it's not a direct replacement but not to hard.

Use the model with the Bowden thread to screw into the creatbot adjusting screws.

Chris

Can you give me tips to adapt to the hotend E3D on my CreatBot DX3 3d Printer?
Thanks.]]> maxprints Mechanics Sat, 19 Nov 2016 13:58:14 -0500 https://reprap.org/forum/read.php?14,659896,702362#msg-702362 Re: Extruders compatibility https://reprap.org/forum/read.php?14,659896,702362#msg-702362
It works really well very reliable. Drawback is you lose a bit of print height probably 30mm.

If your interested I can give you a write up of the mods required, it's not a direct replacement but not to hard.

Use the model with the Bowden thread to screw into the creatbot adjusting screws.

Chris]]> staalc Mechanics Sun, 21 Aug 2016 16:24:21 -0400 https://reprap.org/forum/read.php?14,659896,659931#msg-659931 Re: Extruders compatibility https://reprap.org/forum/read.php?14,659896,659931#msg-659931
Creatbot doesn't have support?
Are three extruders necessary?

Appears to be a bowden type extruder where the push mechanism (extruder) is far from
the hot end melting the polymer

What filament in use ABS, PLA other?

What makes you think that new extruders / hotends are NOT going to block?

Change extruder mechanism and / or hotend?

Perhaps some testing on why / where they are getting blocked?
Is temperature true? Measure with external probe and compare to what printer reports.

Have you attempted a change of nozzles? A change in nozzle size?

CreatBot Talk: The Largest 3D Printing Forum | 3D Hubs
[www.3dhubs.com]

Unclogging Procedures (for soliddoodle -- but applicable to all)
[wiki.solidoodle.com]

Preventing and Fixing Jams - Tips & Tricks
[www.3dhubs.com]

There is not just a off market solution here with space limitations etc
Get CreatBot bot to fix or get you another extruder

:S:X]]> cozmicray Mechanics Tue, 03 May 2016 19:34:41 -0400 https://reprap.org/forum/read.php?14,659896,659896#msg-659896 Extruders compatibility https://reprap.org/forum/read.php?14,659896,659896#msg-659896
The place where I work recently purchased a CreatBot DE printer, this one:


We currently want to change the extruders because all of the three hot ends get blocked during the prints, but we are no sure about the hot ends compatibility... We have the three extruders model, pretty similar to this one:


Can anyone please tell me how can I know if the aftermarket Hot ends are compatible with these ones?
]]> fucho Mechanics Tue, 03 May 2016 17:02:52 -0400