Build Plate to Hot End Distance I'm having a little bit of difficulty getting ABS to stick to the blue painter's tape. I do have a heated build plate on the way but I was wondering that, just in case, is there a specific gap that there should be between the tip and the build plate for the best adheasion without the plastic bunching up or smearing. (Ignore that) https://reprap.org/forum/read.php?151,97939,97939#msg-97939 Mon, 11 May 2026 02:32:03 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?151,97939,98013#msg-98013 Re: Build Plate to Hot End Distance https://reprap.org/forum/read.php?151,97939,98013#msg-98013 brnrd General Mendel Topics Sat, 17 Sep 2011 11:06:23 -0400 https://reprap.org/forum/read.php?151,97939,97994#msg-97994 Re: Build Plate to Hot End Distance https://reprap.org/forum/read.php?151,97939,97994#msg-97994 NewPerfection General Mendel Topics Sat, 17 Sep 2011 02:46:54 -0400 https://reprap.org/forum/read.php?151,97939,97946#msg-97946 Re: Build Plate to Hot End Distance https://reprap.org/forum/read.php?151,97939,97946#msg-97946 james glanville General Mendel Topics Fri, 16 Sep 2011 16:34:18 -0400 https://reprap.org/forum/read.php?151,97939,97939#msg-97939 Build Plate to Hot End Distance https://reprap.org/forum/read.php?151,97939,97939#msg-97939
(Ignore that)]]> Gattling General Mendel Topics Fri, 16 Sep 2011 15:23:08 -0400